Contact 1-800-314-3578

ADP® BCRMC3148-S01 ERP_061827
  1. pin-int

ADP® BCRMC3148-S01 ERP_061827

ADP® BC BCRMC3148-S01 Air Handler with Piston Metering and Slant Coil, 48000 Btu/hr BTU, 1600 cu-ft/min, 208 - 240 VAC

  • Manufacturer: Advanced Distributor Products
  • Brand Name: ADP®
  • Part Number: ERP_061827
  • MPN: BCRMC3148-S01
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

ADP® Air Handler with Piston Metering and Slant Coil, Series: BC, 4 ton Nominal, 48000 Btu/hr BTU, 208 - 240 VAC, 94.6 - 108.2 A, 25 kW, 1/2 hp, 60 Hz, 1 -Phase, 1600 cu-ft/min, Configuration: Multi-Position, 7/8, 7/8 in ODF Suction, 3/8 in ODF Liquid, 3/4 in FPT Condensate Drain Connection, R-410A Refrigerant, 18 x 25 in Filter, Heavy Gauge Steel, Pre-Painted Galvanized, 20 in W x 49 in H x 26 in D

Amperage Rating      :      94.6 - 108.2 A
BTU Rating      :      48000 Btu/hr
CFM Rating      :      1600 cu-ft/min
Configuration      :      Multi-Position
Connection Type      :      7/8, 7/8 in ODF Suction, 3/8 in ODF Liquid, 3/4 in FPT Condensate Drain
Dimensions      :      20 in W x 49 in H x 26 in D
Filter Size      :      18 x 25 in
Finish      :      Pre-Painted Galvanized
Frequency Rating      :      60 Hz
HP Rating      :      1/2 hp
Material      :      Heavy Gauge Steel
Nominal Capacity      :      4 ton
Phase      :      1
Refrigerant Type      :      R-410A
Voltage Rating      :      208 - 240 VAC
Wattage      :      25 kW
  • Rifled copper tubing, patented lance fin design
  • High efficiency three speed motors
  • Dynamically balanced blowers for quiet vibration-free operation
  • Drain pans are molded of corrosion-proof engineered polymer
  • Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
  • Filter rack with filter built-into every air handler
  • Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
  • Fan time delay available as kit or factory installed
  • Easily converted to counterflow with kit
  • All coils are individually pressure tested at 450 lb/sq-in then pressurized and sealed
  • 8 in W x 10 in Dia wheel
  • Constant speed, three speed blower motor
  • Right hand refrigeration and drain connection
  • Slab number (C3)
  • 0 and 5 kW, hot water standard stripped wire
  • 18-1/2 in W x 21 in D supply duct opening
  • 15-3/4 in W x 22 in D return duct opening
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/ADP_BCRMB6136_S03_Catalog.pdf