Airquest® RGH150HFCH0AAA ERP_018191

Airquest® Single Package Rooftop Gas Heat/Electric Cooling Unit, 150000 Btu/hr Cooling, 150000 - 240000 Btu/hr Heating Input BTU Rating, 208 - 230 V, 60 A, 11.9 kW, 1/4 hp, 1100 rev/min, 60 Hz, 3 -Phase, Scroll Compressor, 6250 cu-ft/min, 12.2 EER, 12.5 ton, 2 -Stage, R-410A Refrigerant, 64.5 dBA Decibel Rating, Steel, Galvanized, Baked Enamel-Coated, 115-7/8 in L x 63-3/8 in W x 57-3/8 in H

• Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
• Gas efficiencies upto 82%
• Induced draft combustion
• Redundant gas valve with one or two-stage of heating pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
• TXV refrigerant metering device on each circuit, exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
• Cooling operating range from 35 deg F upto 125 deg F
• Access panels with easy grip handles and no-strip screw feature
• 2 in disposable return air filters
• Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
• Full perimeter base rail with built-in rigging adapters and fork truck slots
• Scroll compressors with internal line break overload protection
• 24 V control circuit protected with resettable circuit breaker
• Permanently lubricated evaporator fan motor and permanently lubricated, totally enclosed, shaft down condenser motors
• Low pressure, freeze protection and high pressure switches
• 10 years limited warranty on aluminized heat exchanger, five-years compressor limited and one-year parts limited warranty
• Dual compressors
• High heat
• Medium static option (belt drive) (all three-phase models)
• Enthalpy economizer with bara-relief, enthalpy sensor
• Standard control

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Airquest_RGH090HDBA0AAA_Specification_Sheet.pdf