American Standard D-100-199-AS ERP_074648

American Standard Gas Water Heater, 100 gal Capacity, 199900 Btu/hr BTU, 194 gal First Hour Delivery, 3.2 gal/min at 100 deg F Temperature Rise Recovery, 80% Thermal Efficiency AFUE, Lessthan 5 A, 120 VAC, 60 Hz, 2 in Water, 3/4 in Gas Connection, 300 lb/sq-in Test, 150 lb/sq-in Working Pressure, 6 in Vent Dia, Natural Gas, LP Gas Fuel, Direct Spark Ignition, Steel Tank, 40 - 140 deg F, 73-5/8 in H x 30-1/4 in Dia

• Heavy gauge steel tank - incorporating fewer internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service
• Inner tank glass-lined - with Dura-Glas and fired at 1600 deg F for optimum protection from the effects of corrosion
• R-8.3 Non-CFC foam Insulated - to save energy and reduce fuel costs by maximizing heat retention
• (4) anode rods - to ensure maximum tank life
• Self-cleaning turbulence inducing cold water inlet-tube - engineered to diminish hard water area sediment deposits
• Full sized hand-hole cleanout - for eased tank inspection and/or removal of sediment deposits
• Electronic direct-spark ignition system - saves fuel by eliminating the need for a standby gas pilot
• Automatic motorized flue damper - reduces tank heat loss during standby periods for lowest operating costs
• Fully adjustable 24 V controls - provide temperature settings to 180 deg F
• Factory installed energy cut-off system and pressure/temperature relief valve
• Top 1-1/2 in, 2 in rear/front water connections - for universal replacements, connection to circulating lines and eased multiple heater or storage tank installations
• American standard gas water heaters - are certificated at 300 lb/sq-in test pressure and 150 lb/sq-in working pressure, all tanks are hydrostatically tested at the factory
• 3 years limited warranty on inner glass-lined tank, one-year limited warranty on all other component parts

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/American_Standard_D_100_199_AS_Specification_Sheet.pdf