Contact 1-800-314-3578
Axiom Hydronic Mini System Feeder, 115 VAC, 60 Hz, 1 -Phase, 15 lbf/sq-in Cut-Out Pressure, 1/2 in FPT Discharge Connection, 6 gal Capacity, 0.7 gal/min Pump Rating, 50 W, 11-3/4 in W x 16 in H
| Capacity | : | 6 gal |
| Connection Type | : | 1/2 in FPT Discharge |
| Dimensions | : | 11-3/4 in W x 16 in H |
| Frequency Rating | : | 60 Hz |
| Phase | : | 1 |
| Power Rating | : | 50 W |
| Pressure Rating | : | 15 lbf/sq-in Cut-Out |
| Pump Rating | : | 0.7 gal/min |
| Voltage Rating | : | 115 VAC |
- The pressure pal is ideal for feeding and pressurizing closed hydronic systems that do not require cold static fill pressures higher than 25 lbf/sq-in
- It is compatible with both water and glycol/water solutions
- 6 US gal (22.7L) tank for storage and mixing
- Power supply plugs into any standard 115 VAC outlet
- Diaphragm pump can run dry without damage
- No direct connection to potable water supply eliminates need for backflow prevention
- Make-up fluid stored in the feeder tank can be pre-treated
- Diverter valve allows easy purging of air on initial start-up, and manual agitation of solution
- Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped into the system
- Provides leak detection - dropping fluid level provides immediate notice that the system has developed a leak
- Fluid drained for service can easily be put back into the system
- Fluid level switch shuts the pump off if the storage tank level gets too low
- Power supply adapter with LED power light
- 0.04 L/sec (0.7 gal/min) at free flow, self-priming upto 1.2 m (4 ft) pump performance
- Feeder shall be compatible with glycol solutions of upto 50% concentration
- Pump shall be capable of running dry without damage
- 1/2 in FPT discharge connection
Instruction/Installation Manual