Contact 1-800-314-3578
Barber Colman Hydraulic Actuator, 0.16 A at 60 Hz, 0.19 A at 50 Hz, 120 VAC (+/-10%), 11.7 W at 60 Hz, 12.9 W at 50 Hz, 60 sec at 72 deg F (to Extend), 40 sec at 72 deg F (to Retract) No Load Stroke, 15 sec at 72 deg F Retract on Power Loss Timing, 10000 ohm or Greater Input, NEMA 1 Enclosure, Painted Steel Upper Housing Body, -20 to 140 deg F
| Amperage Rating | : | 0.16 A at 60 Hz, 0.19 A at 50 Hz |
| Body Material | : | Painted Steel Upper Housing |
| Enclosure Type | : | NEMA 1 |
| Input Impedance | : | 10000 ohm or Greater |
| Power Rating | : | 11.7 W at 60 Hz, 12.9 W at 50 Hz |
| Temperature Rating | : | -20 to 140 deg F |
| Timing Range | : | 60 sec at 72 deg F (to Extend), 40 sec at 72 deg F (to Retract) No Load Stroke, 15 sec at 72 deg F Retract on Power Loss |
| Voltage Rating | : | 120 VAC (+/-10%) |
- This Series is compatible with 2 - 15 VDC input signals from Schneider Electric System 8000TM, Schneider Electric NETWORK 8000 and Schneider Electric DMS DDC controllers
- Linear motion output shaft controlled by a variable DC voltage input signal
- Nominal 3 VDC operating span
- Fixed start point and non-positive positioning
- Die cast lower housing and painted steel upper housing
- Hydraulic actuator with oil-immersed motor, transducer and pump
- Internal feedback circuitry provides non-positive positioning control in relation to the controller signal
Specification Sheet