Contact 1-800-314-3578
Bard® Air Conditioner Package Unit, Series: W, W48A2-B Model, 4 ton Nominal, 48500 Btu/hr Cooling BTU Rating, 230/208 VAC, 42 A, 1/3 hp Fan and Blower Motor, 825 rev/min Fan Motor, 985 rev/min Blower Motor, 60 Hz, 3 -Phase, Scroll Compressor, 2700 cu-ft/min Fan Motor, 1550 cu-ft/min Cooling Blower Motor, 9 EER, R-410A Refrigerant, Wall Mounting, 20 x 30 x 1 in Filter, 40 A Fuse, 20 ga Steel, Galvanized, Zinc-Coated, Buckeye Gray, 42.075 in W x 84.875 in H x 22.432 in D
| Amperage Rating | : | 42 A |
| CFM Rating | : | 2700 cu-ft/min Fan Motor, 1550 cu-ft/min Cooling Blower Motor |
| Color | : | Buckeye Gray |
| Compressor Type | : | Scroll |
| Cooling BTU Rating | : | 48500 Btu/hr |
| Dimensions | : | 42.075 in W x 84.875 in H x 22.432 in D |
| EER Rating | : | 9 |
| Filter Size | : | 20 x 30 x 1 in |
| Finish | : | Galvanized, Zinc-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 40 A |
| HP Rating | : | 1/3 hp Fan and Blower Motor |
| Material | : | 20 ga Steel |
| Model | : | W48A2-B |
| Mounting Type | : | Wall |
| Nominal Capacity | : | 4 ton |
| Phase | : | 3 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 825 rev/min Fan Motor, 985 rev/min Blower Motor |
| Voltage Rating | : | 230/208 VAC |
- Compressor and controls - right side
- Revision code (2)
- Economizer - fully modulating ventilation, low ambient control is required with economizer for low temperature compressor operation
- 2 in pleated (MERV 8) filter
- Front (standard) supply air outlet
- Standard coil
- Control modules: high pressure control is auto reset (HPC), low pressure control is auto reset (LPC), compressor control module has adjustable 30 sec to 5 min delay on break timer (CCM), low ambient control permits cooling operation down to 0 deg F (LAC), the alarm relay has a set of normally open and normally closed dry contacts to provide the ability to signal a condition of shutdown on either high or low pressure controls (ALR)
- 13.4/15 A-rated load, 15.9 A branch circuit selection current, 110/110 A locked rotor compressor, 2.5 A fan motor and 2.3 A blower motor
- Two-speed fan and blower motor
- Self-contained energy efficient system
- Aluminum finned copper coils - grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency
- Twin blowers - move air quietly
- Phase rotation monitor - standard on all three-phase scroll compressors
- Foil faced insulation - standard on all units
- Full length mounting brackets
- Electrical components - are easily accessible for routine inspection and maintenance through a right side, service panel opening
- Electric heat strips - features an automatic limit and thermal cut-off safety control
- Filter service door - separate service door provides easy access for filter change
- Condenser fan and motor shroud assembly slide out for easy access
- Slope top - standard feature for water run-off
Instruction/Installation Manual