Contact 1-800-314-3578
Bard® Heat Pump Package Unit, Series: W, W48H2-A Model, 4 ton Nominal, 46000 Btu/hr Cooling Cooling BTU Rating, 26000 Btu/hr Low Heating, 44000 Btu/hr High Heating Heating BTU Rating, 230/208 VAC, 63 A, 1/3 hp Fan Motor, 1/2 hp Blower Motor, 60 Hz, 1 -Phase, 825 rev/min Fan Motor, 1070 rev/min Blower Motor, Scroll Compressor, 2750 cu-ft/min Fan Motor, 1550 cu-ft/min Cooling Blower Motor, 9 EER, R-410A Refrigerant, 70 A Fuse, Wall Mounting, 20 x 30 x 1 in Filter, 20 ga Steel, Galvanized, Zinc-Coated, Buckeye Gray, 42.075 in W x 84.875 in H x 22.432 in D
| Amperage Rating | : | 63 A |
| CFM Rating | : | 2750 cu-ft/min Fan Motor, 1550 cu-ft/min Cooling Blower Motor |
| Color | : | Buckeye Gray |
| Compressor Type | : | Scroll |
| Cooling BTU Rating | : | 46000 Btu/hr Cooling |
| Dimensions | : | 42.075 in W x 84.875 in H x 22.432 in D |
| EER Rating | : | 9 |
| Filter Size | : | 20 x 30 x 1 in |
| Finish | : | Galvanized, Zinc-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 70 A |
| HP Rating | : | 1/3 hp Fan Motor, 1/2 hp Blower Motor |
| Heating BTU Rating | : | 26000 Btu/hr Low Heating, 44000 Btu/hr High Heating |
| Material | : | 20 ga Steel |
| Model | : | W48H2-A |
| Mounting Type | : | Wall |
| Nominal Capacity | : | 4 ton |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 825 rev/min Fan Motor, 1070 rev/min Blower Motor |
| Voltage Rating | : | 230/208 VAC |
- Revision code (2)
- Economizer - standard versions, enthalpy ventilation (ECONWMS-E5B field installed part no), partial full flow (75% of rated cooling CFM), all ECONWMS versions have 3 in D intake hood
- 2 in pleated (MERV 8) filter
- Front (standard) supply air outlet
- Standard coil
- Control modules: the high and low pressure controls are auto reset, the low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0 deg F
- 19.5/21.2 A-rated load, 23.1 A branch circuit selection current, 131/131 A locked rotor compressor, 2.5 A fan motor and 3.3 A blower motor
- Two-speed blower motor and fan motor
- Self-contained energy efficient heating and cooling system
- Aluminum finned copper coils - grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency
- Twin blowers - move air quietly
- Phase rotation monitor - standard on all three-phase scroll compressors
- Foil faced insulation - standard on all units
- Full length mounting brackets
- Electrical components - are easily accessible for routine inspection and maintenance through a right side, service panel opening
- Electric heat strips - features an automatic limit and thermal cut-off safety control
- Filter service door - separate service door provides easy access for filter change
- Condenser fan and motor shroud assembly slide out for easy access
- Slope top - standard feature for water run-off
- Top rain flashing - standard feature on all models
Instruction/Installation Manual