Contact 1-800-314-3578

  1. pin-int

BELIMO® B215+LRB24-SR ERP_008174

BELIMO® B2 B215+LRB24-SR Characterized Control Valve with Actuator, 1/2 in Nominal, FNPT Connection, Forged Brass

  • Manufacturer: BELIMO Holding
  • Brand Name: BELIMO®
  • Part Number: ERP_008174
  • MPN: B215+LRB24-SR
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

BELIMO® Characterized Control Valve with Actuator, Series: B2, 1/2 in Nominal, FNPT Connection, 2-Way -Ways/Position, 600 lb/sq-in Body, 200 lb/sq-in Close-Off Pressure, 10 Flow Coefficient, Stainless Steel Stem, Stainless Steel Ball Trim, EPDM Stem Packing Material, Tefzel Disc, Teflon PTFE Seat, EPDM O-Ring Seat Seal, Forged Brass, Nickel-Plated, 3 ft 18 AWG Plenum Cable with 1/2 in Conduit Connector Electrical Connection, 24 VAC +/-20% at 50/60 Hz, 24 VDC +/-10%, 1.5 W Running, 0.4 W Holding, NEMA 2, IP42 Enclosure, Hot and Chilled Water, Up to 60% Glycol Service Type, 0 - 250 deg F Water, -22 to 122 deg F Ambient, 9.4 in L x 2.6 in W x 5.58 in H

Connection Type      :      FNPT
Dimensions      :      9.4 in L x 2.6 in W x 5.58 in H
Disc Material      :      Tefzel
Electrical Connection      :      3 ft 18 AWG Plenum Cable with 1/2 in Conduit Connector
Enclosure Type      :      NEMA 2, IP42
Finish      :      Nickel-Plated
Flow Coefficient (Cv)      :      10
Material      :      Forged Brass
Nominal Size      :      1/2 in
Number of Ways/Position      :      2-Way
Packing Material      :      EPDM Stem
Power Rating      :      1.5 W Running, 0.4 W Holding
Pressure Rating      :      600 lb/sq-in Body, 200 lb/sq-in Close-Off
Seal Material      :      EPDM O-Ring Seat
Seat Material      :      Teflon PTFE
Service Type      :      Hot and Chilled Water, Up to 60% Glycol
Stem Material      :      Stainless Steel
Temperature Rating      :      0 - 250 deg F Water, -22 to 122 deg F Ambient
Trim Material      :      Stainless Steel Ball
Voltage Rating      :      24 VAC +/-20% at 50/60 Hz, 24 VDC +/-10%
  • Non fail-safe actuator
  • Modulating control
  • Equal percentage flow characteristics
  • 75 deg controllable flow range
  • 0% for A to AB leakage
  • Maintenance-free service
  • Electronic throughout 0 - 90 deg rotation overload protection
  • 2 - 10 VDC, 4 - 20 mA with ZG-R01 (500 ohm, 1/4 W resistor) operating range Y
  • 100 kohm for 2 - 10 VDC (0.1 mA), 500 ohm for 4 - 20 mA input impedance
  • 2 - 10 VDC feedback output
  • 90 deg angle of rotation
  • Reversible with built-in switch direction of rotation (motor)
  • Position indication integrated into handle
  • External push button manual override
  • 90 sec running time
  • Less than 35 dB noise level (motor)
  • 5 years warranty