Contact 1-800-314-3578

Bock™ 119SK ERP_002981
  1. pin-int

Bock™ 119SK ERP_002981

Bock™ SideKick 119SK Indirect Water Heater, 110 gal Capacity, 104000 Btu/hr BTU, 8 gal/min, 120 V, Steel, Powder-Coated

  • Manufacturer: Bock Water Heaters, Inc
  • Brand Name: Bock™
  • Part Number: ERP_002981
  • MPN: 119SK
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Bock™ SideKick Indirect Water Heater, 110 gal Capacity, 104000 Btu/hr BTU, 8 gal/min, 265 gal/hr First Hour Delivery, 120 V, 60 Hz, 1 -Phase, 1-1/2 in NPT Hot and Cold Water, 1 in NPT to Boiler, from Boiler Connection, 150 lb/sq-in Working, 300 lb/sq-in Test Pressure, 3.5 ft WC Heat Source Friction Loss, Steel, Powder-Coated, 120 deg F, 65 in H x 28 in Dia

BTU Rating      :      104000 Btu/hr
Capacity      :      110 gal
Connection Type      :      1-1/2 in NPT Hot and Cold Water, 1 in NPT to Boiler, from Boiler
Dimensions      :      65 in H x 28 in Dia
Finish      :      Powder-Coated
First Hour Delivery      :      265 gal/hr
Flow Rate      :      8 gal/min
Frequency Rating      :      60 Hz
Heat Source Friction Loss      :      3.5 ft WC
Material      :      Steel
Phase      :      1
Pressure Rating      :      150 lb/sq-in Working, 300 lb/sq-in Test
Temperature Rating      :      120 deg F
Voltage Rating      :      120 V
  • 1-wall full throat 1-1/2 in Dia internal coil heat exchanger
  • Factory installed aquastat on all models
  • Factory installed temperature and pressure relief valve and brass drain valve
  • Robust construction - inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality
  • All steel construction with an environmentally-friendly powder-coat finish providing a tough and attractive exterior
  • Cobalt-enriched porcelain enamel glass lined tank and coil are highly-resistant to aggressive water not susceptible to damage due to the presence of chloride in the water
  • Ecomate insulation does not contribute to global warming
  • 2 magnesium anode rods - inhibit corrosion and maximize tank life, electrolysis attacks the anode rods, not the tank
  • Factory installed dielectric nipples on boiler connections - provides greater insulating protection