Bradford White® Gas Water Heater, 50 gal Capacity, 50000 Btu/hr BTU, 14.7 kW, 93 gal/hr First Hour Delivery, 0.6 Energy Factor, 54 gal/hr at 90 deg F Temperature Rise Recovery, 80% Recovery Efficiency, 4 in Dia Vent, 3/4 in NPT Water, 1/2 in Gas Connection, 150 lb/sq-in Working, 300 lb/sq-in Test Pressure, Natural Gas Fuel, Piezo Ignition, Yes, 60-5/8 in H x 22 in Dia
| BTU Rating |
: |
50000 Btu/hr |
| Capacity |
: |
50 gal |
| Connection Type |
: |
3/4 in NPT Water, 1/2 in Gas |
| Dimensions |
: |
60-5/8 in H x 22 in Dia |
| Efficiency |
: |
80% Recovery |
| Energy Factor |
: |
0.6 |
| First Hour Delivery |
: |
93 gal/hr |
| Fuel Type |
: |
Natural Gas |
| Ignition System |
: |
Piezo |
| Lead-Free/Contains Lead |
: |
Yes |
| Power Rating |
: |
14.7 kW |
| Pressure Rating |
: |
150 lb/sq-in Working, 300 lb/sq-in Test |
| Recovery Rate |
: |
54 gal/hr at 90 deg F Temperature Rise |
| Vent Size |
: |
4 in Dia |
- Intelligent gas control with proven millivolt powered technology
- Proprietary algorithms provide enhanced first hr delivery ratings and tighter temperature differentials
- Micro-processor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
- Flashing green LED provides positive indication that pilot is on
- High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Advanced ScreenLok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
- Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
- Maintenance-free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- Factory installed Hydrojet total performance system
- Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
- Pedestal base, factory installed heat traps
- Protective magnesium anode rods
- 3 x 4 in "snap lock" draft diverter
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- 6 or 10 years limited tank and component parts warranties