Bradford White® Gas Water Heater, 40 gal Capacity, 34000 Btu/hr BTU, 10 kW, 57 gal/hr First Hour Delivery, 0.63 Energy Factor, 37 gal/hr at 90 deg F Temperature Rise Recovery, 77% Recovery Efficiency, 3 or 4 in Dia Vent, 3/4 in NPT Water, 1/2 in Gas Connection, 150 lb/sq-in Working, 300 lb/sq-in Test Pressure, Natural Gas Fuel, Piezo Ignition, 59-3/8 in H x 22 in Dia
BTU Rating |
: |
34000 Btu/hr |
Capacity |
: |
40 gal |
Connection Type |
: |
3/4 in NPT Water, 1/2 in Gas |
Dimensions |
: |
59-3/8 in H x 22 in Dia |
Efficiency |
: |
77% Recovery |
Energy Factor |
: |
0.63 |
First Hour Delivery |
: |
57 gal/hr |
Fuel Type |
: |
Natural Gas |
Ignition System |
: |
Piezo |
Power Rating |
: |
10 kW |
Pressure Rating |
: |
150 lb/sq-in Working, 300 lb/sq-in Test |
Recovery Rate |
: |
37 gal/hr at 90 deg F Temperature Rise |
Vent Size |
: |
3 or 4 in Dia |
- Advanced ScreenLok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
- Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
- Easy and quick lighting of the pilot burner by push button
- Rugged and durable - base allows easy transport and positioning, while providing corrosion-resistant contact with floor
- Maintenance-free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- This water heater is designed in accordance with housing and urban development (H.U.D.) and is certified for installation in a manufactured home (mobile home) only and must be installed in an enclosure that will completely separate the water heater combustion and venting system from the dwelling interior
- Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Automatic temperature selection at your fingertips, built-in energy cut-off switch prevents abnormally high water temperature for extra safety
- 2 in non-CFC foam insulation covers the side and top, reducing the amount of heat loss
- Heat trap - installed on hot water outlet to minimize heat loss through piping
- Protective magnesium anode rods
- 3 x 4 in "snap lock" draft diverter
- Maximizes the amount of heat absorbed by the tank and reduces heat loss during standby periods
- Heavy gauge steel automatically formed, rolled and welded
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- 6 or 10 years limited tank and component parts warranties