Bradford White® TTW Gas Water Heater, 75 gal Capacity, 75500 Btu/hr BTU, 22.1 kW, 81 gal/hr at 90 deg F Temperature Rise Recovery, 80% Recovery Efficiency, 3 or 4 in Dia Vent, 120 VAC, 60 Hz, 3/4 in NPT Water, 1/2 in Gas Connection, 150 lb/sq-in Working, 300 lb/sq-in Test Pressure, Propane Gas Fuel, Spark to Pilot Ignition, Yes, 69-7/16 in H x 30-3/4 in D x 26 in Dia
BTU Rating |
: |
75500 Btu/hr |
Capacity |
: |
75 gal |
Connection Type |
: |
3/4 in NPT Water, 1/2 in Gas |
Dimensions |
: |
69-7/16 in H x 30-3/4 in D x 26 in Dia |
Efficiency |
: |
80% Recovery |
Frequency Rating |
: |
60 Hz |
Fuel Type |
: |
Propane Gas |
Ignition System |
: |
Spark to Pilot |
Lead-Free/Contains Lead |
: |
Yes |
Power Rating |
: |
22.1 kW |
Pressure Rating |
: |
150 lb/sq-in Working, 300 lb/sq-in Test |
Recovery Rate |
: |
81 gal/hr at 90 deg F Temperature Rise |
Vent Size |
: |
3 or 4 in Dia |
Voltage Rating |
: |
120 VAC |
- Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot
- Proprietary algorithms provide enhanced first hr delivery ratings and tighter temperature differentials
- Micro-processor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
- Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Temperature and pressure relief valve included
- Durable tamper-proof design low restriction brass drain valve
- Protective magnesium rod
- Factory installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
- Factory installed Hydrojet total performance system
- 6 years limited tank and component parts warranty
- Designed for installations where atmospheric units cannot be used
- Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
-
Catalog
https://assets.unilogcorp.com/267/ITEM/DOC/Bradford_White_RG1PV50S6N_Catalog.pdf
-
Instruction/Installation Manual
https://assets.unilogcorp.com/267/ITEM/DOC/Bradford_White_RG2PV75H6X_Manual.pdf
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/Bradford_White_RG1PV40S6X_Specification_Sheet.pdf