Bray® VAMS24-27 ERP_059645

Bray's wide variety of commercial electric actuator choices increases flexibility when choosing peripheral products for building automation systems. We offer many different torque outputs and optional features to ensure you have the best actuator for the application. Jumper or DIP switch selectable features allow versatility in the field. The actuators are maintenance-free, which means fewer call backs after installation and start-up. In addition, our actuators are manufactured to ISO 9001 and Six Sigma standards making them the highest quality on the market today.

Bray® Electric Actuator, 24 V, 27 in-lb Torque, 1/2 in Threaded Connection, Modulating Control Signal, NEMA 2, IP54 Enclosure, -22 to 140 deg F, 6-3/8 in L x 3-15/16 in W x 2-1/4 in H, Environmental Conditions: -40 to 185 deg F Storage, 95% RH Maximum, Non-Condensing

• Control input impedance 100 kohm
• Equipment rating class 2 or safety extra-low voltage (SELV)
• Rotation range - 95 deg maximum full stroke, adjustable stop 35 - 95 deg maximum position
• Time - 90 deg of rotation power on (Running) 90 sec constant for 0 - 27 in-lb load, at all operating conditions, power off (returning) 12 - 17 sec for 0 - 27 in-lb load at room temperature 16 sec nominal at full rated load, 22 sec maximum with 27 in-lb load at -22 deg F
• 120 in plenum rated cable with 19 AWG conductors and 1/4 in ferrule ends electrical connections
• 60000 full stroke cycles with 27 in-lb load, 1500000 repositions with 27 in-lb load life cycle
• Less than 37 dBA at 27 in-lb load, at a distance of 39-13/32 in (1 m) running, less than 20 dBA at a distance of 39-13/32 in holding, less than 56 dBA at 27 in-lb load at a distance of 39-13/32 in (1 m) returning
• 24 VAC at 50/60 Hz 5.1 V-A running, 2.8 V-A holding position, 24 VDC, 1.9 W running, 1.1 W holding position
• 5 years warranty

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Bray_VAMS24_27_Specification_Sheet.pdf