Comfortmaker® Single Package Rooftop Gas/Electric Cooling Unit, Series: RGH, 300000 Btu/hr Cooling, 220000 - 400000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 25.2 kW, 1/4 hp Condenser Fan, 717 - 911 rev/min Evaporator Fan/Motor, 1100 Condenser Fan/Motor, 60 Hz, 3 -Phase, (2) Scroll Compressor, Configuration: Evaporator Coil - 26 sq-ft Face Area, 15 Fins/in, Condenser Coil - 34.3 sq-ft Face Area, 17 Fins/in, Vertical, 11.2 EER, 25 ton, R-410A Refrigerant, Belt Drive, 3/4 in Condensate Drain Connection, 157-3/4 in L x 86-3/8 in W x 57-3/8 in H
Compressor Type |
: |
(2) Scroll |
Configuration |
: |
Evaporator Coil - 26 sq-ft Face Area, 15 Fins/in, Condenser Coil - 34.3 sq-ft Face Area, 17 Fins/in, Vertical |
Connection Size |
: |
3/4 in Condensate Drain |
Dimensions |
: |
157-3/4 in L x 86-3/8 in W x 57-3/8 in H |
Drive Type |
: |
Belt |
EER Rating |
: |
11.2 |
Frequency Rating |
: |
60 Hz |
HP Rating |
: |
1/4 hp Condenser Fan |
Input BTU Rating |
: |
300000 Btu/hr Cooling, 220000 - 400000 Btu/hr Heating |
Phase |
: |
3 |
Refrigerant Type |
: |
R-410A |
Rotational Speed |
: |
717 - 911 rev/min Evaporator Fan/Motor, 1100 Condenser Fan/Motor |
Tonnage |
: |
25 ton |
Voltage Rating |
: |
208 - 230 VAC |
Wattage |
: |
25.2 kW |
- A - standard motor
- A - none outdoor control
- A - aluminum/copper - condenser/evaporator coil configuration
- One-piece, high efficiency electric cooling with a low profile, prewired, tested and charged at the factory
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- Fully insulated cabinet
- Two-stage cooling with independent circuits and control on all models
- All units have high/low pressure switches
- 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, end drain
- Belt drive evaporator fan motor and pulley combinations
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box and compressors
- No-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the units metal
- Newly - designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Standard outdoor temperature cooling operation range up to 125 deg F and down to 35 deg F
- TXV metering devices on all models to precisely control refrigerant flow
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
- Capable of thru-the-base or thru-the-curb electrical routing, full range of electric heaters and one-point electrical connections