Contact 1-800-314-3578
The fan shall be of bolted and welded construction utilizing corrosion resistant fasteners. The scroll wrapper shall be minimum 14 ga steel and the scroll side panels shall be minimum 12 ga steel. The entire fan housing shall have continuously welded seams for leak-proof operation. A performance cut-off shall be furnished to prevent the recirculation of air in the fan housing. The fan housing shall be field rotatable to any one of eight discharge positions and shall have a minimum 1-1/2 in outlet discharge flange. Bearing support shall be minimum 10 gauge welded steel. Side access inspection ports shall be provided with quick release latches for access to the motor compartment without removing the weather cover. Lifting lugs shall be provided for ease of installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure, and maximum fan RPM.
COOK® Centrifugal Vent Set Blower, 50 - 43400 cu-ft/min, Steel and Aluminum
| CFM Rating | : | 50 - 43400 cu-ft/min |
| Material | : | Steel and Aluminum |
Specification Sheet