Dwyer® Differential Pressure Transmitter, Series: DM 2000, 4 - 20 mA Signal Output, 10 - 35 VDC, Screw Type Terminal Block Electrical Connection, 0.25 in WC Pressure, +/-1% Full Scale at 70 deg F Accuracy, Outputs: 2-Wire, 3.5 Digit LCD Display, 0 - 1250 ohm Loop Resistance, 38 mA, Vertical Mount, 20 - 120 deg F
Accuracy |
: |
+/-1% Full Scale at 70 deg F |
Amperage Rating |
: |
4 - 20 mA Signal Output |
Current Consumption |
: |
38 mA |
Display Type |
: |
3.5 Digit LCD |
Electrical Connection |
: |
Screw Type Terminal Block |
Loop Resistance |
: |
0 - 1250 ohm |
Mounting Orientation |
: |
Vertical |
Outputs |
: |
2-Wire |
Pressure Rating |
: |
0.25 in WC |
Temperature Rating |
: |
20 - 120 deg F |
Voltage Rating |
: |
10 - 35 VDC |
- Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
- Digital push-button zero and span simplify calibration over typical turn-potentiometers
- Same size as Magnehelic simplifies field upgrade to digital pressure gage by reducing install steps
- Zero and span controls provide easy calibration checks and shorter installation time to get device running and monitoring
- Quick response to pressure changes means no delay in signaling and alerting to critical situations
- Easy to read LCD display provides immediate local alerts allowing corrective action to be taken quicker to eliminate the problem from becoming widespread
- Tamper-proof button configuration to prevent accidental changes to the settings
- Air and non-combustible, compatible gases
- 1/8 in ID tubing process connections