Contact 1-800-314-3578
First® Fan Coil with Piston Metering, Series: CDXQ, 3 ton Nominal, 36000 Btu/hr BTU, 120 V, 7 A Minimum Circuit, 4.6 A Motor, 1/5 hp, 1310 - 940 cu-ft/min, Configuration: Horizontal Recessed, 3/4 in NPT Drain Connection, 15 A Fuse, Ceiling Mounting, 64-1/8 in W x 10 in H x 21 in D
| Amperage Rating | : | 7 A Minimum Circuit, 4.6 A Motor |
| BTU Rating | : | 36000 Btu/hr |
| CFM Rating | : | 1310 - 940 cu-ft/min |
| Configuration | : | Horizontal Recessed |
| Connection Type | : | 3/4 in NPT Drain |
| Dimensions | : | 64-1/8 in W x 10 in H x 21 in D |
| Fuse Rating | : | 15 A |
| HP Rating | : | 1/5 hp |
| Mounting Type | : | Ceiling |
| Nominal Capacity | : | 3 ton |
| Voltage Rating | : | 120 V |
- Two-speed fan operation
- Factory installed freeze protector
- Sloped and insulated drain pan
- Electrical service switch
- Manual air bleed port on HW coil
- Copper tube heating and cooling coils
- One-point power connection
- The space saving CDXQ Series fan coil is only 10 in H thus allowing it to recess in a ceiling
- Recessed ceiling fan coils save valuable floor space and eliminate costly equipment closets
- The CDXQ fan coil has a factory installed circulating pump with easy access hot water check valve
- Piping the CDXQ fan coil to a properly sized gas-fired water heater provides space heating
- Contact the factory for assistance with sizing
- All CDXQ fan coils include a 120/24 V transformer and are completely prewired
Specification Sheet