Contact 1-800-314-3578

Franklin Electric CI-001-GS2 ERP_047023
  1. pin-int

Franklin Electric CI-001-GS2 ERP_047023

Franklin Electric GS CI-001-GS2 Variable Frequency Drive, 200 - 230 V, 5 A, 0.75 kW, 1 hp, 3 -Phase, NEMA 1 Enclosure

  • Manufacturer: Franklin Electric
  • Brand Name: Franklin Electric
  • Part Number: ERP_047023
  • MPN: CI-001-GS2
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Franklin Electric Variable Frequency Drive, Series: GS, 200 - 230 V, 5 A, 0.75 kW, 1 hp, 50/60 Hz Input, 0 - 400 Hz Output, 3 -Phase, NEMA 1 Enclosure, 1.9 kVA VA, 14 - 122 deg F Ambient, 2.76 in W x 6.9 in H x 5.12 in D

Amperage Rating      :      5 A
Dimensions      :      2.76 in W x 6.9 in H x 5.12 in D
Enclosure Type      :      NEMA 1
Frequency Rating      :      50/60 Hz Input, 0 - 400 Hz Output
HP Rating      :      1 hp
Phase      :      3
Power Rating      :      0.75 kW
Temperature Rating      :      14 - 122 deg F Ambient
VA Rating      :      1.9 kVA
Voltage Rating      :      200 - 230 V
  • Sensor less vector control - precise speed control and powerful high torque, up to 150% at 0.5 Hz, improves control with varying loads, auto tuning simplifies commissioning, sensor less mode also selectable
  • Space vector modulation for superior motor life - super clean sine wave for cool running motors and high efficiency, minimizes heat losses in for long motor life
  • Integrated pid - precise control to maintain flow-rate, pressure, temperature and more without any extra controllers, accepts 0 - 10 V, 4 - 20 mA analog signals and more
  • Dynamic braking circuit - minimizes deceleration time on high inertia loads when used with braking resistors
  • Built-in RS-485 communication - remote control and monitoring with other controllers (modbus standard)
  • Ground-fault protection - superior equipment protection
  • Cooling fan control - quiet, low noise operation; easy to replace fan module
  • 95% Relative humidity maximum (non-condensing)
  • 1000 m maximum, 5.9 m/sq-sec maximum altitude and vibration 1
  • Control method - sensor less vector, V/F control (space vector PWM)
  • Frequency setting resolution - digital reference: 0.01 Hz (below 99 Hz) and 0.1 Hz (100 Hz and over), analog reference: 0.03 - 50 Hz
  • Frequency setting accuracy digital - 0.01% of maximum output frequency, analog: 0.1% of maximum output frequency
  • V/F ratio - linear, square, user V/F
  • Overload capacity - 1 min at 150%, 30 sec at 200% (with inverse characteristic proportional to time)
  • Torque boost - auto, manual (0 - 15%)
  • Assigned terminals - FX (forward), RX (reverse), BX (inverter gate blocking), RST (reset), JOG (jog)
  • Eight Digital inputs programmable
  • 0 - 10 V linear analog output
  • Operator control - 4 digit LED display/keypad, terminals, ModBus communication
  • Analog frequency setting - 0 - 10 V, 4 - 20 mA, digital: keypad, communication: ModBus
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Franklin_Electric_CI_001_GS2_Specification_Sheet.pdf