Contact 1-800-314-3578
Gibson® Split System Heat Pump, Series: JT5BD, JT5BD-024KA Model, 208 - 230 VAC, 14.5 A, 1/8 hp, 60 Hz, 1 -Phase, 24000 Btu/hr BTU, 2370 cu-ft/min, 12.4 EER, 13 SEER, HSPF: 7.95, 3/8 in Liquid, 3/4 in Suction Connection, R-22 Dry Refrigerant, 25 A Fuse, 15.17 sq-ft Face Area, 18 Fins/in Coil Rating, 2 ton, 1 -Stage, Steel, Galvanized, Polyester Urethane-Coated, 27 in H x 30-3/4 in W x 30-3/4 in D
| Amperage Rating | : | 14.5 A |
| BTU Rating | : | 24000 Btu/hr |
| CFM Rating | : | 2370 cu-ft/min |
| Coil Rating | : | 15.17 sq-ft Face Area, 18 Fins/in |
| Connection Type | : | 3/8 in Liquid, 3/4 in Suction |
| Dimensions | : | 27 in H x 30-3/4 in W x 30-3/4 in D |
| EER Rating | : | 12.4 |
| Finish | : | Galvanized, Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 25 A |
| HP Rating | : | 1/8 hp |
| HSPF Rating | : | 7.95 |
| Material | : | Steel |
| Model | : | JT5BD-024KA |
| Number of Stages | : | 1 |
| Phase | : | 1 |
| Refrigerant Type | : | R-22 Dry |
| SEER Rating | : | 13 |
| Tonnage | : | 2 ton |
| Voltage Rating | : | 208 - 230 VAC |
- 5th generation
- Braze 13 SEER
- Revision code (A)
- 10.8 A-rated load, 56 A locked rotor - compressor, 0.91 A fan motor, 11.8 A total
- Composite base pan absorbs sound and is corrosion-resistant, composite is also stronger and lighter than steel
- Copper tube/aluminum fin coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
- Permanently lubricated condenser heavy-duty PSC motor for long-lasting reliability and quiet operation, requires no maintenance and is completely protected from rain and snow
- Full service valves - brass valves are easily accessible and simplify servicing of the refrigeration system
- Complete metal wrapper - protects the units coil from being damaged
- Time/temperature defrost - a reliable, industry standard control offers various time settings to meet any-type climate
- Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
- One-piece top/orifice - designed for maximum airflow and quiet operation
- Common suction service port - this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
- Five min restart time delay - when the units shuts down, a five min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
- Suction accumulator - protection from liquid flood back and future compressor failures
- Hot gas muffler - reduces compressor noise and vibration
- Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
- Five-years parts warranty, five-years compressor warranty
Instruction/Installation Manual