Contact 1-800-314-3578

Gibson® 921981J ERP_082028
  1. pin-int

Gibson® 921981J ERP_082028

Gibson® JT4BE 921981J Split System Heat Pump, 18000 Btu/hr BTU, 2800 cu-ft/min, 208 - 230 VAC, 14.1 A, 1/3 hp, 60 Hz

  • Manufacturer: Nortek Global
  • Brand Name: Gibson®
  • Part Number: ERP_082028
  • MPN: 921981J
  • UPC: 663132312047
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Gibson® Split System Heat Pump, Series: JT4BE, JT4BE-018KA Model, 208 - 230 VAC, 14.1 A, 1/3 hp, 60 Hz, 1 -Phase, 18000 Btu/hr BTU, 2800 cu-ft/min, 12 - 13.5 EER, 14 SEER, HSPF: 8 - 8.5, 3/4 in Suction, 3/8 in Liquid Connection, Scroll Compressor, R-410A Refrigerant, 20 A Fuse, 25.4 sq-ft Face Area, 20 Fins/in Coil Rating, 1.5 ton, 1 -Stage, Steel, Galvanized, Polyester Urethane-Coated, 43 in H x 30-3/4 in W x 30-3/4 in D

Amperage Rating      :      14.1 A
BTU Rating      :      18000 Btu/hr
CFM Rating      :      2800 cu-ft/min
Coil Rating      :      25.4 sq-ft Face Area, 20 Fins/in
Compressor Type      :      Scroll
Connection Type      :      3/4 in Suction, 3/8 in Liquid
Dimensions      :      43 in H x 30-3/4 in W x 30-3/4 in D
EER Rating      :      12 - 13.5
Finish      :      Galvanized, Polyester Urethane-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      20 A
HP Rating      :      1/3 hp
HSPF Rating      :      8 - 8.5
Material      :      Steel
Model      :      JT4BE-018KA
Number of Stages      :      1
Phase      :      1
Refrigerant Type      :      R-410A
SEER Rating      :      14
Tonnage      :      1.5 ton
Voltage Rating      :      208 - 230 VAC
  • Four-design Series
  • Braze 14 SEER
  • Revision code
  • R-410A earth friendly non-ozone depleting refrigerant
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish resists corrosion 50% better than comparable units
  • Copper tube/aluminum fin coils for both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, increase durability and reliability
  • Permanently lubricated heavy-duty PSC motor for long-lasting reliability and quiet operation and requires no maintenance and is completely protected from rain and snow
  • Full port suction brass ball valve provides low pressure drop and ease of service, valve is actuated by 1/4 in turn full open to full close
  • Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
  • Suction accumulator - protection from liquid flood back and future compressor failures
  • High pressure switch - protects against abnormally high system pressures, auto-reset feature prevents nuisance service visits
  • Liquid line filter drier - included with unit, field installed
  • One-piece top orifice designed for maximum airflow and quiet operation
  • Five min restart time delay - when the units shuts down, a five min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
  • Composite base pan absorbs sound and is corrosion-resistant, composite is also stronger and lighter than steel
  • Hot gas muffler - reduces compressor noise and vibration
  • Complete metal wrapper protects the unit coil from being damaged
  • 10 year limited parts warranty