Contact 1-800-314-3578

Gibson® JT4BF036KA ERP_017269
  1. pin-int

Gibson® JT4BF036KA ERP_017269

Gibson® JT4BF JT4BF036KA Split System Heat Pump, 36000 Btu/hr BTU, 4000 cu-ft/min, 208 - 230 VAC, 22.1 A, 1/4 hp, 60 Hz

  • Manufacturer: Nortek Global
  • Brand Name: Gibson®
  • Part Number: ERP_017269
  • MPN: JT4BF036KA
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Gibson® Split System Heat Pump, Series: JT4BF, 208 - 230 VAC, 22.1 A, 187 W Low Speed, 250 W High Speed, 1/4 hp, 60 Hz, 1 -Phase, 36000 Btu/hr BTU, 4000 cu-ft/min, 12.5 EER, 16 SEER, HSPF: 9, 7/8 in Suction, 3/8 in Liquid Connection, Scroll Compressor, R-410A Refrigerant, 35 A Fuse, 25.4 sq-ft Face Area, 18 Fins/in Coil Rating, 3 ton, 2 -Stage, Steel, Galvanized, Polyester Urethane-Coated, 43 in H x 30-3/4 in W x 30-3/4 in D

Amperage Rating      :      22.1 A
BTU Rating      :      36000 Btu/hr
CFM Rating      :      4000 cu-ft/min
Coil Rating      :      25.4 sq-ft Face Area, 18 Fins/in
Compressor Type      :      Scroll
Connection Type      :      7/8 in Suction, 3/8 in Liquid
Dimensions      :      43 in H x 30-3/4 in W x 30-3/4 in D
EER Rating      :      12.5
Finish      :      Galvanized, Polyester Urethane-Coated
Frequency Rating      :      60 Hz
Fuse Rating      :      35 A
HP Rating      :      1/4 hp
HSPF Rating      :      9
Material      :      Steel
Number of Stages      :      2
Phase      :      1
Power Rating      :      187 W Low Speed, 250 W High Speed
Refrigerant Type      :      R-410A
SEER Rating      :      16
Tonnage      :      3 ton
Voltage Rating      :      208 - 230 VAC
  • Four-design Series
  • Braze 16 SEER
  • R-410A earth friendly non-ozone depleting refrigerant
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish is 1.5 mil Thick and resists corrosion 50% better than comparable units
  • Copper tube/aluminum fin coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
  • The Ultra tech compressor operates with two-stages of heating and cooling capacities to provide superior comfort and efficiency, Copeland's proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation
  • Demand defrost - provides additional energy savings in heating by defrosting only when necessary
  • Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
  • Complete metal wrapper - durable metal guard protects the coil from yard hazards and extreme weather
  • High pressure switch - protects against abnormally high system pressures, auto-reset feature prevents nuisance service visits
  • Liquid line filter drier - included with unit, field installed
  • One-piece top orifice designed for maximum airflow and quiet operation
  • Five min restart time delay - when the units shuts down, a five min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
  • Composite base pan absorbs sound and is corrosion-resistant, composite is also stronger and lighter than steel
  • Suction accumulator - protection from liquid flood back and future compressor failures
  • Low pressure switch - loss of charge protection ensures long compressor life and auto-reset feature prevents nuisance service visits
  • Hot gas muffler - reduces compressor noise and vibration
  • Common suction service port - this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
  • 10 year limited parts warranty