Contact 1-800-314-3578
Hatco® Castone Electrical Booster Water Heater, 6 gal Capacity, 54 kW, 542 gal/hr at 40 deg F, 310 gal/hr at 70 deg F, 149.9 A, 208 V, 60 Hz, 3 -Phase, 200 A Fuse, Stainless Steel, Powder-Coated, 18 in W x 12.03 in H x 29-1/4 in D
| Amperage Rating | : | 149.9 A |
| Capacity | : | 6 gal |
| Dimensions | : | 18 in W x 12.03 in H x 29-1/4 in D |
| Finish | : | Powder-Coated |
| Flow Rate | : | 542 gal/hr at 40 deg F, 310 gal/hr at 70 deg F |
| Frequency Rating | : | 60 Hz |
| Fuse Size | : | 200 A |
| Material | : | Stainless Steel |
| Phase | : | 3 |
| Power Rating | : | 54 kW |
| Voltage Rating | : | 208 V |
- All models include a Castone lined tank with a 10 years limited warrant
- Features include - temperature/pressure relief valve, pressure reducing valve, (2) temperature/pressure gauges, a high-temperature limit control, pilot indicator light, on-off switch, and a low-water cut-off to prevent element burnout due to a low water condition
- Available with slide brackets for-mounting under a dish table
- Each booster has fiberglass insulation to minimize heat loss
- Hatco electric booster heaters are factory pre-plumbed and pre-wired with calibrated immersion thermostat and high temperature limit switch
- Stainless steel front panel and powder-coated silver-gray hammertone body is standard on all Compact models
- Swing-away front panels with low-water cut-off, control fuses and transformer allow quick access to probes and elements for easier serviceability
Instruction/Installation Manual