Contact 1-800-314-3578
Heat-Flo offers quality well insulated hot water storage tanks that provide the abundant hot water that today's homes require. Homes with multiple baths, hot tubs, and body sprays increase the requirement for the "dump loads" that tankless coils, instantaneous water heaters, and plate heat exchangers can not provide. By adding hot water storage, the system designer can achieve an energy efficient balance between heat input and storage by taking full advantage of a high efficiency heat source. The result will be reduced burner cycling, and abundant hot water.
Heat-flo Hot Water Booster/Storage Tank, 30 gal Capacity, 23-1/2 in Dia, 1 in NPT Connection, Stainless Steel, 150 lb/sq-in Pressure, 34 in H
| Capacity | : | 30 gal |
| Connection Type | : | 1 in NPT |
| Diameter | : | 23-1/2 in |
| Dimensions | : | 34 in H |
| Material | : | Stainless Steel |
| Pressure Rating | : | 150 lb/sq-in |
- R-12 insulation, less than 1 deg F/hr heat loss
- Flexible thermoplastic jacket that will not dent or corrode
- Stainless steel dip tubes
- All connections are on top on the standard units, connecting to a high efficiency wall-mount boiler or instantaneous water heater is about as easy as it gets
- Units are provided with 2-separate connections for heat source supply and return, and an aquastat, the result is excellent temperature control and no guesswork
- These 2-connections are hydraulically decoupled from cold and hot, high hot water draw rates will not effect the circulator/control performance
- Drain valve and T+P valve are factory installed
- Honeywell L4080B control is standard
- Dip tubes in tank located to circulate water through the heat source, and return to the tank
Instruction/Installation Manual