Contact 1-800-314-3578
Heat-flo Indirect Water Heater, 115 gal Capacity, 273100 Btu/hr BTU, 14 gal/min, 467 gal/hr at 140 deg F, 607 gal/hr at 115 deg F First Hour Delivery, 1 in NPT Inlet/Outlet Domestic and Boiler Water Connection, 150 lb/sq-in Working, 90 lb/sq-in Coil Pressure, 15.6 sq-ft Coil Heating Surface, 364 gal/hr at 140 deg F, 504 gal/hr at 115 deg F Continuous Draw, 15.8 ft WC Pressure Drop, Stainless Steel, 200 deg F, 74 in H x 28 in Dia
| BTU Rating | : | 273100 Btu/hr |
| Capacity | : | 115 gal |
| Coil Heating Surface | : | 15.6 sq-ft |
| Connection Type | : | 1 in NPT Inlet/Outlet Domestic and Boiler Water |
| Continuous Draw | : | 364 gal/hr at 140 deg F, 504 gal/hr at 115 deg F |
| Dimensions | : | 74 in H x 28 in Dia |
| First Hour Delivery | : | 467 gal/hr at 140 deg F, 607 gal/hr at 115 deg F |
| Flow Rate | : | 14 gal/min |
| Material | : | Stainless Steel |
| Pressure Drop | : | 15.8 ft WC |
| Pressure Rating | : | 150 lb/sq-in Working, 90 lb/sq-in Coil |
| Temperature Rating | : | 200 deg F |
- Large, smooth-wall coils deliver full output for years
- No finned tubing to collect lime and sediment
- Includes over 2 in of insulation and a flexible thermoplastic jacket that will not dent or corrode and less than 10/hr heat loss
- All connections are on top on the standard units for a neat, clean installation
- Brass drain and relief valves are factory installed
- Standard Honeywell control and well for reliability and easy service
- Low operating cost
Instruction/Installation Manual