Contact 1-800-314-3578
Heat-Flo offers quality indirect water heating systems that provide abundant hot water, low operating cost and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.
Heat-flo Indirect Water Heater, 80 gal Capacity, 259340 Btu/hr BTU, 14 gal/min, 418 gal/hr at 140 deg F, 551 gal/hr at 115 deg F First Hour Delivery, 1 in NPT Inlet/Outlet Domestic and Boiler Water Connection, 150 lb/sq-in Working, 90 lb/sq-in Coil Pressure, 14.8 sq-ft Coil Heating Surface, 346 gal/hr at 140 deg F, 479 gal/hr at 115 deg F Continuous Draw, 9.9 ft Pressure Drop, Stainless Steel, 200 deg F, 56 in H x 28 in Dia
| BTU Rating | : | 259340 Btu/hr |
| Capacity | : | 80 gal |
| Coil Heating Surface | : | 14.8 sq-ft |
| Connection Type | : | 1 in NPT Inlet/Outlet Domestic and Boiler Water |
| Continuous Draw | : | 346 gal/hr at 140 deg F, 479 gal/hr at 115 deg F |
| Dimensions | : | 56 in H x 28 in Dia |
| First Hour Delivery | : | 418 gal/hr at 140 deg F, 551 gal/hr at 115 deg F |
| Flow Rate | : | 14 gal/min |
| Material | : | Stainless Steel |
| Pressure Drop | : | 9.9 ft |
| Pressure Rating | : | 150 lb/sq-in Working, 90 lb/sq-in Coil |
| Temperature Rating | : | 200 deg F |
- Large, smooth-wall coils deliver full output for years
- No finned tubing to collect lime and sediment
- Includes over 2 in of insulation and a flexible thermoplastic jacket that will not dent or corrode and less than 10/hr heat loss
- All connections are on top on the standard units for a neat, clean installation
- Brass drain and relief valves are factory installed
- Standard Honeywell control and well for reliability and easy service
- Low operating cost
Instruction/Installation Manual