Contact 1-800-314-3578
Hubbell brand W series pressure switches provide time tested, reliable control for automatic water systems. The switch is universally accepted for use as original equipment on water well pumps or pumping systems. Its simple design makes it easy to use for professionals and non-professionals alike.
Hubbell® Pressure Switch, 1/4 in FNPT Connection, DPDT, 3 lb/sq-in Cut-In, 35 lb/sq-in Cut-Out, 6 - 15 psid, 15 - 35 lb/sq-in Adjustment, 30 - 50 lb/sq-in Factory Set Pressure, 2 hp at 120 V, 3 hp at 240 V 1 PH, 5 hp at 240 V, 1 hp at 480/600 V 3 PH, NEMA 1 Enclosure
| Connection Type | : | 1/4 in FNPT |
| Contact Configuration | : | DPDT |
| Enclosure Type | : | NEMA 1 |
| HP Rating | : | 2 hp at 120 V, 3 hp at 240 V 1 PH, 5 hp at 240 V, 1 hp at 480/600 V 3 PH |
| Pressure Rating | : | 3 lb/sq-in Cut-In, 35 lb/sq-in Cut-Out, 6 - 15 psid, 15 - 35 lb/sq-in Adjustment, 30 - 50 lb/sq-in Factory Set |
- Corrosion-resistant cover
- No wire looping
- Straight through wiring
- Visible contacts
- No-drift pressure settings
- Captive cover screw
- Easy to adjust
Specification Sheet