Contact 1-800-314-3578
Kelvinator Heat Pump, Series: JT4BE, JT4BE-030K Model, 208 - 230 VAC, 18.9 A Minimum Circuit, 2.9 A Full Load, 64 A Locked Rotor, 12.8 A Rated Load, 1/3 hp, 60 Hz, 1 -Phase, 30000 Btu/hr BTU, 2800 cu-ft/min, 14 SEER, 3/4 in Suction, 3/8 in Liquid Connection, Scroll Compressor, R-410A Refrigerant, 30 A Fuse, 25.4 sq-ft Face Area, 20 Fins/in Coil Rating, 2.5 ton Capacity, 78 dBA, 1 -Stage, Galvanized Steel, Polyester Urethane-Coated, 43 in H x 30-3/4 in W x 30-3/4 in D
| Amperage Rating | : | 18.9 A Minimum Circuit, 2.9 A Full Load, 64 A Locked Rotor, 12.8 A Rated Load |
| BTU Rating | : | 30000 Btu/hr |
| CFM Rating | : | 2800 cu-ft/min |
| Capacity | : | 2.5 ton |
| Coil Rating | : | 25.4 sq-ft Face Area, 20 Fins/in |
| Compressor Type | : | Scroll |
| Connection Type | : | 3/4 in Suction, 3/8 in Liquid |
| Dimensions | : | 43 in H x 30-3/4 in W x 30-3/4 in D |
| Finish | : | Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 30 A |
| HP Rating | : | 1/3 hp |
| Material | : | Galvanized Steel |
| Model | : | JT4BE-030K |
| Number of Stages | : | 1 |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| SEER Rating | : | 14 |
| Sound Level | : | 78 dBA |
| Voltage Rating | : | 208 - 230 VAC |
- R-410A earth friendly non-ozone depleting refrigerant
- Composite base pan absorbs sound and is corrosion-resistant, composite is also stronger and lighter than steel
- Copper tube/aluminum fin coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
- Permanently lubricated condenser heavy-duty PSC motor for long-lasting reliability and quiet operation, requires no maintenance and is completely protected from rain and snow
- Durable, attractive cabinet - designed using galvanized steel with a polyester urethane finish, 950 hr salt spray finish resists corrosion 50% better than comparable units
- Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
- High pressure switch - protects against abnormally high system pressures, auto-reset feature prevents nuisance service visits
- Liquid line filter drier - included with unit, field installed
- One-piece top orifice designed for maximum airflow and quiet operation
- Five min restart time delay - when the units shuts down, a five min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
- Suction accumulator - protection from liquid flood back and future compressor failures
- Hot gas muffler - reduces compressor noise and vibration
- Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
- Complete metal wrapper - protects the units coil from being damaged
- 10 year all parts warranty
- Braze product identifier
- USA designed and assembled
Specification Sheet