Contact 1-800-314-3578
Liberty Pumps® Sewage Pump, Series: LE50, 115 V, 12 A Full Load, 22.5 A Locked Rotor, 1/2 hp, 140 gal/min at 5 ft, 1 -Phase, 2 in FNPT Discharge, 140 deg F Liquid, 221 deg F Thermal Overload, 226 deg F Stator, 11-1/2 in W x 14 in H, Cast Iron, Powder-Coated
| Amperage Rating | : | 12 A Full Load, 22.5 A Locked Rotor |
| Dimensions | : | 11-1/2 in W x 14 in H |
| Discharge Size | : | 2 in FNPT |
| Finish | : | Powder-Coated |
| Flow Rate | : | 140 gal/min at 5 ft |
| HP Rating | : | 1/2 hp |
| Material | : | Cast Iron |
| Phase | : | 1 |
| Temperature Rating | : | 140 deg F Liquid, 221 deg F Thermal Overload, 226 deg F Stator |
| Voltage Rating | : | 115 V |
- Oil filled, thermally protected motor
- Permanently lubricated bearings
- Two vane, corrosion resistant hytrel impeller
- All stainless steel fasteners and rotor shaft
- Quick-disconnect 10 ft standard power cord allows replacement of cord in seconds without breaking seals to motor
- The shaft seal shall be of the carbon/ceramic unitized design, with buna-n elastomers and stainless housings
- The pump shall have a 2-vane semi-open impeller capable of passing a 2 in spherical solid
- Wide-angle float automatic level control
- Class B stator winding insulation
- Standard limited warranty shall be three-years
Catalog