Contact 1-800-314-3578
Lovejoy® Jaw Coupling Hub, 1/2 in Bore, 1.36 in OD, 1.23 in L Hub, 3/4 in L Through Bore, Finished with No Keyway Bore, L070 Coupling, Jaw, 14000 rev/min Speed, 43.2 in-lb Torque, Sintered Iron, -40 to 212 deg F, 1.98 in OAL, Metallic
| Bore Size | : | 1/2 in |
| Bore Type | : | Finished with No Keyway |
| Color | : | Metallic |
| Coupling Size | : | L070 |
| Coupling Type | : | Jaw |
| Dimensions | : | 1.98 in OAL |
| Hub Size | : | 1.23 in L |
| Length Through Bore | : | 3/4 in |
| Material | : | Sintered Iron |
| Outside Diameter | : | 1.36 in |
| Speed Rating | : | 14000 rev/min |
| Temperature Rating | : | -40 to 212 deg F |
| Torque Rating | : | 43.2 in-lb |
- Standard L-type coupling hub materials are either sintered iron (L035-L190) or cast iron (L225-L276)
- The L-type coupling consists of 2-standard L-type hubs and one-spider
- Unless stated otherwise, hub torque and horsepower ratings assume a SOX(NBR) rubber spider is being used
- Fail safe will still perform if elastomer fails
- No metal to metal contact
- Resistant to oil, dirt, sand, moisture and grease
- More than 850000 combinations of bore sizes
- Jaw coupling hubs are standard with one-set screw, for 2-set screws see RRS and RRC sections
Catalog