Contact 1-800-314-3578
TE-703 temperature sensors offer the industry's most extensive range of enclosure, installation and sensor types to satisfy all HVAC, industrial and commercial applications. These revolutionary sensors incorporate more than twenty five years of product development and experience drawn from millions of installations world wide in all types of applications.
Mamac Systems® Pipe Temperature Sensor, Series: TE-703, 10000 ohm NTC Thermistor Sensor, 1/2 in NPT Adapter Connection, 18 ga Galvanized Steel, -40 to 210 deg F Operating, -40 to 160 deg F Ambient
| Connection Type | : | 1/2 in NPT Adapter |
| Material | : | 18 ga Galvanized Steel |
| Sensor Type | : | 10000 ohm NTC Thermistor |
| Temperature Rating | : | -40 to 210 deg F Operating, -40 to 160 deg F Ambient |
- Hermetically sealed, fast response 304 SS probe crimp attached to the enclosure for a low profile mating surface
- Keyed enclosure cover to swing open without removing the screws and 1/2 in conduit opening are some of the features which improve reliability and lower installation cost
- 304 stainless steel thin wall probe with a cold rolled hermetically sealed end forms a monolithic encapsulated cavity for the sensor and is immune to failures caused by high humidity, contamination, thermal shock and vibration
- Fast response brass contact sensor for strap on applications is insulated from the enclosure to provide accurate pipe surface temperature measurement
- Galvanized steel flange material
- Polycarbonate 30 % glass filled, rated UL 94V-5-0 plastic enclosure
- 18 ga galvanized steel NEMA-1/IP-30 enclosure
- +/- 0.2 deg C inter-changeability at 77 deg F thermistor sensor
- Brass with poly compression sleeve
- 1/4 in OD, 0.02 in wall, 304 stainless steel probe
- 5 years warranty
Specification Sheet