Contact 1-800-314-3578
Mammoth® Single Package Gas/Electric Unit with Restrictor, Series: R8GD, 030K072C Model, 29000 Btu/hr Cooling, 72000 Btu/hr Heating Input BTU Rating, 57600 Btu/hr Heating Output BTU Rating, 208 - 230 VAC, 15.7 A, 1/4 hp Indoor Blower, 1/4 hp Outdoor Fan, 60 Hz, 1 -Phase, Scroll Compressor, Configuration: Downflow/Horizontal, 3800 cu-ft/min, 11 EER, 13 SEER, 2.5 ton, R-410A Refrigerant, 76 dBA Decibel Rating, Galvanized Steel, Polyurethane-Coated, 55.8 in L x 47.5 in W x 35 in H
| Amperage Rating | : | 15.7 A |
| CFM Rating | : | 3800 cu-ft/min |
| Compressor Type | : | Scroll |
| Configuration | : | Downflow/Horizontal |
| Decibel Rating | : | 76 dBA |
| Dimensions | : | 55.8 in L x 47.5 in W x 35 in H |
| EER Rating | : | 11 |
| Finish | : | Polyurethane-Coated |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/4 hp Indoor Blower, 1/4 hp Outdoor Fan |
| Input BTU Rating | : | 29000 Btu/hr Cooling, 72000 Btu/hr Heating |
| Material | : | Galvanized Steel |
| Model | : | 030K072C |
| Output BTU Rating | : | 57600 Btu/hr Heating |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| SEER Rating | : | 13 |
| Tonnage | : | 2.5 ton |
| Voltage Rating | : | 208 - 230 VAC |
- Quality compressor - state of the art Copeland scroll compressor is standard equipment
- Proven industry standard components easier service and availability
- High and low pressure switch added compressor protection
- Micro channel coils - both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, increase durability, reliability and reduce corrosion
- Liquid line filter drier factory installed at a convenient location for service
- Externally accessible service ports quick access to refrigerant system without disrupting operation
- Heavy gauge full perimeter base rails facilitates forklift handling and curb mounting
- Convertible air delivery - horizontal or down flow to accommodate rooftop or horizontal applications
- Galvanized steel cabinet - polyurethane finish provides 950 hr salt spray protection
- Wire guard coated with earth friendly epoxy and plastic mesh hail guard - a guard that will never rust and protects the units coil from being damaged
- Corrosion-resistant drain pan - quickly drains away evaporator condensate
- One-piece top for great fit and finish, total seal - well designed, quality construction, drip edge on top panels whisks away rainwater
- Quiet operation and low vibration - 0.2 in fan blade combined with custom Venturi condenser fan
- SmartLite® control board - provides extended life to igniters using hot surface ignition technology
- Hot surface igniter - innovative application of an appliance-type igniter with a 20 years history of reliability
- 80% AFUE
Specification Sheet