Contact 1-800-314-3578
Mammoth® Package Electric Heat Pump, Series: Q6SP, 10 ton Nominal, 120000 Btu/hr Cooling Cooling BTU Rating, 114000 Btu/hr Heating Heating BTU Rating, 460 VAC, 18 A Minimum Circuit, (2) 1/3 hp Outdoor Fan, 60 Hz, 3 -Phase, 1075 rev/min Outdoor Fan, (2) Scroll Compressor, 3850 cu-ft/min, 13 SEER, 11.5 at Part Load IEER Rating, 11 EER, 3/4 in PVC Drain Connection, R-410A Refrigerant, 2 Cool -Stage, 20 A Fuse, 89 dBA, Belt Drive, Outdoor Coil - 34 sq-ft Face Area, 18 Fins/in, Indoor Coil - 11.3 sq-ft Face Area, 14 Fins/in Coil Rating, Steel, Galvanized, Polyester Urethane-Coated, 101-1/2 in W x 55-1/4 in H x 57-1/2 in D
| Amperage Rating | : | 18 A Minimum Circuit |
| CFM Rating | : | 3850 cu-ft/min |
| Coil Rating | : | Outdoor Coil - 34 sq-ft Face Area, 18 Fins/in, Indoor Coil - 11.3 sq-ft Face Area, 14 Fins/in |
| Compressor Type | : | (2) Scroll |
| Connection Type | : | 3/4 in PVC Drain |
| Cooling BTU Rating | : | 120000 Btu/hr Cooling |
| Dimensions | : | 101-1/2 in W x 55-1/4 in H x 57-1/2 in D |
| Drive Type | : | Belt |
| EER Rating | : | 11 |
| Finish | : | Galvanized, Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 20 A |
| HP Rating | : | (2) 1/3 hp Outdoor Fan |
| Heating BTU Rating | : | 114000 Btu/hr Heating |
| IEER Rating | : | 11.5 at Part Load |
| Material | : | Steel |
| Nominal Capacity | : | 10 ton |
| Number of Stages | : | 2 Cool |
| Phase | : | 3 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1075 rev/min Outdoor Fan |
| SEER Rating | : | 13 |
| Sound Level | : | 89 dBA |
| Voltage Rating | : | 460 VAC |
- 6-Series
- Rectangular duct
- TXV expansion valve
- State of the art Copeland scroll compressor is standard equipment
- For easy service - high/low service ports allow quick access without disrupting operation
- Earth friendly non-ozone depleting refrigerant
- Mesh hail guard - a guard that will never rust and protects the units coil from being damaged
- Copper tube/aluminum fin coils - both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
- The 950 hr salt spray finish is 1.5 mil Thick and resists corrosion 50% better than comparable units
- Crankcase heater prevents damaging flooded starts and future compressor failures
- High/low pressure switches - ensure long compressor life featuring manual reset high pressure control
- Freeze protection thermostats provide reliable compressor operation
- Bi-flow liquid line filter/drier - Insures clean and dry refrigeration system
- Suction accumulator - protection from liquid flood back and future compressor failures
- Permanently lubricated condenser motor - a heavy-duty PSC motor for long-lasting reliability and quiet operation, requires no maintenance and is completely protected from rain and snow
- 75 V-A transformer includes 4 A circuit breaker to protect low voltage circuit
- Quick release filter access panels - requires no special servicing tools
- Fully insulated bottom pan helps ensure quiet operation and prevents condensation
- 5 min restart time delay when the units shuts down, 5 min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
- Full perimeter base rail system base rails have rigging holes and do not need to be removed for curb applications, base rails have fork truck slots on three-side
Specification Sheet