Contact 1-800-314-3578
Crane globe and angle valves are highly efficient for regulating flow because disc and seat design provide flow characteristics with proportionate relationships between valve lift and flow rate. This assures accurate regulated flow control. The additional advantage of an angle valve is that it provides a 90 deg turn in piping so fewer joints are required and make-up time and labor are reduced. Each valve in this section is classified by its pressure rating. All valves designated as Class 125, 150, 200 or 300 comply with MSS SP-80 standard practice.
Crane® Globe Valve, 3/8 in Nominal, Threaded Connection, 300 lb/sq-in Cold, 150 lb/sq-in Steam Pressure, Pressure Class: 150, Bronze Body, Integral Bronze Seat, Bronze Stem, Asbestos Free Graphite Packing Material, Cast Iron Handle, -20 to 150 deg F, 6.81 in H
| Body Material | : | Bronze |
| Connection Type | : | Threaded |
| Dimensions | : | 6.81 in H |
| Handle Material | : | Cast Iron |
| Nominal Size | : | 3/8 in |
| Packing Material | : | Asbestos Free Graphite |
| Pressure Class | : | 150 |
| Pressure Rating | : | 300 lb/sq-in Cold, 150 lb/sq-in Steam |
| Seat Material | : | Integral Bronze |
| Stem Material | : | Bronze |
| Temperature Rating | : | -20 to 150 deg F |
- Disc holder retains disc and slips on the stem and fastened by a disc stem ring
- Back seat
- Brass disc washer, lock nut, disc stem ring, gland and packing nut
- Synthetic glass fiber with nitrile binder gasket
- Steel cadmium stud and lock nut
- Mild steel nut
- Aluminum ID plate
- PTFE disc
Catalog