Contact 1-800-314-3578

Keckley 77-2-1/2 ERP_027393
  1. pin-int

Keckley 77-2-1/2 ERP_027393

Keckley 77-2-1/2 Float Angle Valve, 2-1/2 in Nominal, Flange Connection, 250 lb/sq-in Pressure, Cast Iron Body

  • Manufacturer: Keckley
  • Brand Name: Keckley
  • Part Number: ERP_027393
  • MPN: 77-2-1/2
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Keckley has been providing float and lever valves since 1962 and remains one of the largest domestic suppliers of these types of valves. Keckley float and lever valves are sized by capacity and not to line size. These valves are either single seated (tight closing) or double seated (non-tight closing). Keckley single seated tight closing valves normally incorporate a soft disc for a positive closure. Keckley double seated non-tight closing valves are metal to metal seated. They are initially hand lapped for minimal to no leakage, but due to time, wear, and cycling they will begin to leak. They are designed for continuous applications where a little overflow is acceptable; for example: pools, ponds, and drainage. Double Seated valves would not be recommended for applications where overflow will result in flooding a storage/utility room. Float and lever valves are also available in globe (straight through) or angle (90 deg) patterns. Depending upon the type of valve, angle pattern valves could be bottom inlet with a side discharge or a side inlet and bottom discharge.

Keckley Float Angle Valve, Flange Connection, 2-1/2 in Nominal, 250 lb/sq-in Pressure, Cast Iron Body, Neoprene Disc, Bronze Trim, 125 deg F

Body Material      :      Cast Iron
Connection Type      :      Flange
Disc Material      :      Neoprene
Nominal Size      :      2-1/2 in
Pressure Rating      :      250 lb/sq-in
Temperature Rating      :      125 deg F
Trim Material      :      Bronze
  • Keckley float and lever valves are designed to control the level of liquids through mechanical actuation
  • Float valves are actuated through the attached float ball, float rod and lever assembly and do not require any external power source
  • Keckley lever valves are actuated through the use of some external power source such as manual operation, float boxes/mechanisms, electric motors or other actuators through external linkage to the lever of the valve
  • Internal pilot operated
  • Neoprene disc inner valve
  • Angle bottom inlet pattern
  • Low-high allowable pressure drop
  • Commonly used to maintain a water level in an open tank
  • 8 in Dia float