Contact 1-800-314-3578
Maytag® Self-Contained Single Package Heat Pump, Series: Q7RF, Q7RF-X36K Model, 3 ton Nominal, 36000 Btu/hr Cooling Cooling BTU Rating, 34600 Btu/hr Heating Heating BTU Rating, 208 - 230 VAC, 25.5 A Minimum Circuit, 1/4 hp Condenser Fan, 1/2 hp Evaporator Fan, 60 Hz, 1 -Phase, 1100 rev/min Outdoor Fan, Scroll Compressor, 3000 cu-ft/min, 16 SEER, HSPF: 8.2, 12 EER, 3/4 in NPT Drain Connection, R-410A Refrigerant, 2 -Stage, 40 A Fuse, 71 dBA, Steel, Galvanized, Polyester Urethane-Coated, 49 in W x 30.2 in H x 35 in D
| Amperage Rating | : | 25.5 A Minimum Circuit |
| CFM Rating | : | 3000 cu-ft/min |
| Compressor Type | : | Scroll |
| Connection Type | : | 3/4 in NPT Drain |
| Cooling BTU Rating | : | 36000 Btu/hr Cooling |
| Dimensions | : | 49 in W x 30.2 in H x 35 in D |
| EER Rating | : | 12 |
| Finish | : | Galvanized, Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 40 A |
| HP Rating | : | 1/4 hp Condenser Fan, 1/2 hp Evaporator Fan |
| HSPF Rating | : | 8.2 |
| Heating BTU Rating | : | 34600 Btu/hr Heating |
| Material | : | Steel |
| Model | : | Q7RF-X36K |
| Nominal Capacity | : | 3 ton |
| Number of Stages | : | 2 |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1100 rev/min Outdoor Fan |
| SEER Rating | : | 16 |
| Sound Level | : | 71 dBA |
| Voltage Rating | : | 208 - 230 VAC |
- 7th generation
- Round duct
- State of the art Copeland UltraTech™ II scroll compressor provides two-stage heat/cool
- Patented hot gas defrost ensures complete defrost every time
- High/low pressure switches - added compressor protection
- Micro channel indoor and outdoor coils - designed to optimize heat transfer, increase durability and reliability, and reduce weight and refrigerant charge needed
- Five-speed energy efficient ECM blower high static motor that delivers the right air flow
- Compact footprint and profile make the Q7 Series easy to install and transport
- 0 clearance to combustibles on duct side of the unit allows for installations in tight areas
- Wire guard coated with earth friendly epoxy and mesh hail guard will never rust and protect the coil from being damaged by balls, lawnmowers, hail and more
- Drain trap design optimizes drainage capabilities
- Installation-friendly designed to fit in the rear of most pickup trucks, notch support rails allow easy installation on roof curbs and stands
- Easy access to the evaporator coil for cleaning and general maintenance
- Designed to make servicing easier for the contractor, access panels are provided to all major components
- 3 min restart time delay when the units shuts down, a 3 min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
- Galvanized steel cabinetry polyester urethane coat finish that passes 950 hr of salt spray per ASTM standard B117
- Suction accumulator - protection from liquid flood back and future compressor failures
- Demand defrost standard provides additional energy savings in heating by defrosting only when necessary
- Quiet operation and low vibration - swept-wing fan blade combined with custom Venturi condenser fan orifice
- 15.3 A-rated load, 83 A locked rotor compressor
Specification Sheet