Contact 1-800-314-3578
Maytag® Split System Heat Pump, Series: PSH4BD, 208 - 230 VAC, 18.6 A Minimum Circuit, 1/4 hp, 60 Hz, 1 -Phase, 30000 Btu/hr BTU, 3300 cu-ft/min, 11 EER, 13 SEER, HSPF: 8, 3/4 in Suction, 3/8 in Liquid Connection, R-410A Refrigerant, 30 A Fuse, 22.8 sq-ft Face Area, 20 Fins/in Coil Rating, 2.5 ton, 67 dBA, 1 -Stage, Stainless Steel, Silicone Protected Polyester, 41 in H x 31-1/4 in W x 31-1/4 in D
| Amperage Rating | : | 18.6 A Minimum Circuit |
| BTU Rating | : | 30000 Btu/hr |
| CFM Rating | : | 3300 cu-ft/min |
| Coil Rating | : | 22.8 sq-ft Face Area, 20 Fins/in |
| Connection Type | : | 3/4 in Suction, 3/8 in Liquid |
| Dimensions | : | 41 in H x 31-1/4 in W x 31-1/4 in D |
| EER Rating | : | 11 |
| Finish | : | Silicone Protected Polyester |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 30 A |
| HP Rating | : | 1/4 hp |
| HSPF Rating | : | 8 |
| Material | : | Stainless Steel |
| Number of Stages | : | 1 |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| SEER Rating | : | 13 |
| Sound Level | : | 67 dBA |
| Tonnage | : | 2.5 ton |
| Voltage Rating | : | 208 - 230 VAC |
- ComfortAlert module detects system and electrical problem conditions, a diagnostics key directs the service technician to the root cause of a problem
- Smart cool 410 refrigerant (R-410A) earth friendly non-ozone depleting refrigerant
- Durable attractive stainless steel cabinet durable brushed stainless steel protects the coil from yard hazards and extreme weather, unit is trimmed in a silicone-protected polyester finish with a 950 hr salt spray that resists corrosion 50% better than comparable units
- Quiet Plus sound package - consists of a Quiet Plus compressor sound blanket and a swept wing fan blade, both have been engineered to significantly reduce unwanted noise
- Copper tube/aluminum fin coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
- Permanently lubricated condenser heavy-duty PSC motor for long-lasting reliability and quiet operation, requires no maintenance and is completely protected from rain and snow
- Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
- Low pressure switch - loss of charge protection ensures long compressor life and auto-reset feature prevents nuisance service visits
- High pressure switch - protects against abnormally high system pressures, auto-reset feature prevents nuisance service visits
- Liquid line filter drier - included with unit, field installed
- One-piece top orifice designed for maximum airflow and quiet operation
- Five min restart time delay - when the units shuts down, a five min delay keeps the unit from restarting, eliminating the highest cause of compressor failure
- Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
- Composite base pan absorbs sound and is corrosion-resistant, composite is also stronger and lighter than steel
- 12 years all parts limited warranty
- 4th generation
- Braze 13 SEER
Specification Sheet