NuTone® AEN110 ERP_060960

This patent-pending series marks a revolution of our mid-range ventilation fans. It gives professionals the flexibility to handle new construction or room-side retrofit installations from one hard-working product line with a full range of operating points. Innovations include foldable mounting ears and new damper and housing technology that improve building airtightness like never before. And all with new grille designs that are at home in any decor.

NuTone® Bathroom Ventilation Fan, Series: InVent, 120 VAC, 0.3 A, 60 Hz, 23.4 W, 26 ga Steel Housing, Polymeric Grille, Galvanized, White, Ceiling Mounting, 9-1/4 in L, 10 in W, 5-3/4 in H, 11-1/4 in L x 12 in W Grille, 110 cu-ft/min, 4 in Duct

• Plug-in, permanently lubricated motor engineered for continuous operation
• Dynamically balanced centrifugal blower wheel for quiet, efficient performance
• Low rpm for quiet operation
• Rugged construction
• Polymeric, 4 in duct connector with tapered sleeve and no metallic clatter
• 5-3/4 in H allows for 2 x 6 in ceiling installations
• Sturdy, easy, 4-point-mounting directly to joist
• Can be-mounted in ceilings upto 7/12 pitch
• Innovative design - the result of extensive research with designers and consumers grille
• Fan shall have corrosion-resistant galvanized steel housing with four-point-mounting capability
• Blower assembly shall be removable, have a centrifugal type blower wheel and a permanently lubricated motor designed for continuous operation
• 110 cu-ft/min reduces humidity to quickly eliminate fogged mirrors and manage moisture in bathrooms upto 105 sq-ft, so your vision will always be clear and your surroundings will always be comfortable
• Retrofit installations can be done entirely from the room-side - no attic access required, this means a faster, easier installation, so you can move on to something else
• With our TrueSeal damper technology, invent fans reduce air leakage by up to 50% compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air backdrafts
• EzDuct connector can be installed room-side with no attic access required, fan housing connection have never been easier
• UL listed for use over tubs and showers with a GFCI circuit, so it can capture the steam before it spreads throughout the room by locating fan exactly where need it the most
• 110 cu-ft/min at 0.1 in/92 cu-ft/min at 1/4 in flow rate
• 1.3 sones noise
• No nightlight

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/NuTone_AEN110_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/NuTone_AEN110_Specification_Sheet.pdf
• Video Link https://www.youtube.com/watch?v=kZeIhSqyX9I&feature=youtu.be