Payne® PA13NR04800G ERP_038091

Payne® Split System Air Conditioner, 4 ton Nominal, 48000 Btu/hr BTU, 208 - 230 VAC, 26.6 A, 1/4 hp, 60 Hz, 1 -Phase, 1100 rev/min, Scroll Compressor, 3400 cu-ft/min, R-22 Refrigerant, 23.79 sq-ft Face Area Coil Rating, 40 A Fuse, Steel, Pre-Painted, Zinc Phosphate-Coated, 31-3/16 in W x 42 in H

• Dense grille
• The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years
• The permanent split capacitor-type motor was designed for optimum efficiency, the motor was then qualified under extreme conditions to help ensure a long, reliable life
• All screws on cabinet exterior are coated for a long-lasting, rust-resistant, quality appearance
• The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer
• Vertical air discharge carries sound and hot condenser air up and away from adjacent patio areas and foliage
• The base pan is designed for easy removal of water, dirt, and leaves
• Each compressor is protected with internal temperature and current sensitive overloads
• An internal pressure relief valve provides high pressure protection to the refrigerant system
• For improved serviceability, all models are equipped with a compressor terminal plug
• Both service valves are brass, front seating-type with sweat connections
• Valves are externally located so refrigerant tube connections can be made quickly and easily, each valve has a service port for ease of checking operating refrigerant pressures
• One-access panel provides access to electrical controls, removal of top gives access to fan motor, compressor and condenser coil
• Five-years compressor and parts limited warranty on single phase

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Payne_PA13NR04800G_Specification_Sheet.pdf