Contact 1-800-314-3578
Philco Package Air Conditioner, Series: GP5RD, 2.5 ton Nominal, 30000 Btu/hr Cooling BTU Rating, 208 - 230 VAC, 15.7 A Rated Load, 73 A Locked Rotor, 18.2 A Full Load, 1/8 hp Condenser, 1/4 hp Blower Motor, 1100 rev/min Condenser, 900 rev/min Blower Motor, 60 Hz, 1 -Phase, Scroll Compressor, 2800 cu-ft/min, 12 EER, 13 SEER, R-410A Refrigerant, Steel, Galvanized, Polyurethane-Coated, 49 in L x 35 in W x 30.2 in H
| Amperage Rating | : | 15.7 A Rated Load, 73 A Locked Rotor, 18.2 A Full Load |
| CFM Rating | : | 2800 cu-ft/min |
| Compressor Type | : | Scroll |
| Cooling BTU Rating | : | 30000 Btu/hr |
| Dimensions | : | 49 in L x 35 in W x 30.2 in H |
| EER Rating | : | 12 |
| Finish | : | Galvanized, Polyurethane-Coated |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/8 hp Condenser, 1/4 hp Blower Motor |
| Material | : | Steel |
| Nominal Capacity | : | 2.5 ton |
| Phase | : | 1 |
| Refrigerant Type | : | R-410A |
| Rotational Speed | : | 1100 rev/min Condenser, 900 rev/min Blower Motor |
| SEER Rating | : | 13 |
| Voltage Rating | : | 208 - 230 VAC |
- The GP5 Series single packaged air conditioners are high efficiency self-contained cooling and heating units that can be installed on a slab
- State of the art Copeland compressor - scroll compressor is standard
- R410A refrigerant earth friendly non-ozone depleting refrigerant
- High pressure switches ensure long compressor life
- Copper tube/aluminum fin coil - both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability
- Permanently lubricated condenser motor - a heavy-duty PSC motor for long-lasting reliability and quiet operation
- Low voltage transformer includes 3 A fuse to protect low voltage circuit
- Liquid line filter driers are factory installed at a convenient location for service
- Designed using galvanized steel with a polyester urethane coat finish
- Compact footprint and profile make the P5 Series easy to install and transport
- 0 in clearance to combustibles on duct side of the unit allows for installations in tight areas
- Plastic mesh hail guard - a guard that will never rust and protects the units coil from being damaged
- Raised base pan allows water to drain away from the unit
- Easy compressor and control access - designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from side of the unit
- Easy access to the evaporator coil for cleaning and general maintenance
- Drain trap design optimizes drainage capabilities
- Removable top grille assembly - allows ease of service to the fan motor
- 10 years all parts warranty
Specification Sheet