Contact 1-800-314-3578

Phoenix™ PH199-119 ERP_018752
  1. pin-int

Phoenix™ PH199-119 ERP_018752

Phoenix™ PH199-119 Gas Fired Water Heater, 119 gal Capacity, 40000 - 199000 Btu/hr BTU, 316L Stainless Steel

  • Manufacturer: Phoenix Manufacturing Inc
  • Brand Name: Phoenix™
  • Part Number: ERP_018752
  • MPN: PH199-119
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Phoenix™ Gas Fired Water Heater, 119 gal Capacity, 40000 - 199000 Btu/hr BTU, 335 gal First Hour Delivery, 230 gal/hr at 100 deg F Temperature Rise Recovery, 96% Thermal Efficiency, 3 in Air Intake/Exhaust Vent, 1-1/2 in NPT Inlet/Outlet, 1 in FNPT Auxiliary, 3/4 in Gas Line, 3/4 in System Relief Pipe Connection, Direct Spark Ignition, 316L Stainless Steel, 160 deg F, 27 in W x 74 in H

BTU Rating      :      40000 - 199000 Btu/hr
Capacity      :      119 gal
Connection Type      :      3 in Air Intake/Exhaust Vent, 1-1/2 in NPT Inlet/Outlet, 1 in FNPT Auxiliary, 3/4 in Gas Line, 3/4 in System Relief Pipe
Dimensions      :      27 in W x 74 in H
Efficiency      :      96% Thermal
First Hour Delivery      :      335 gal
Ignition System      :      Direct Spark
Material      :      316L Stainless Steel
Recovery Rate      :      230 gal/hr at 100 deg F Temperature Rise
Temperature Rating      :      160 deg F
  • High limit safety sensor
  • Low water cut-off sensor
  • Upper (hot water) temperature sensor
  • Insulated with water blown foam - 2 in thick in the side wall with a rating of R14.2, 3 in thick in the top with a rating of R21.3
  • High-grade polymer jacket encloses insulation - resists dents and corrosion
  • Lower (cold water) temperature sensor
  • Air intake to PVC/CPVC venting, exhaust adaptor to PVC/CPVC/ polypro venting
  • Hot water outlet - stainless steel
  • Factory installed ASME rated temperature and pressure relief valve
  • Tank constructed of 316L stainless steel
  • Proprietary heat exchanger - body constructed of 90/10 cupronickel, top section constructed of 800H stainless steel
  • Stainless steel burner - 120 V motor with wave modulation control
  • Digital LED display system monitoring and temperature adjustment
  • Components located on front of heater for easy service access, all related hardware is made of stainless steel studs and brass nuts
  • Condensate trap assembly
  • Cold water inlet - stainless steel
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Phoenix_PH199_119_Specification_Sheet.pdf