Contact 1-800-314-3578

  1. pin-int

Rheem® RKNL-C240CL40EAHA ERP_035570

Rheem® Classic RKNL-C RKNL-C240CL40EAHA Electric Heat Package Unit, 208 - 230 VAC, 95 A, 8000 cu-ft/min, 20 ton

  • Manufacturer: Rheem Manufacturing
  • Brand Name: Rheem®
  • Part Number: ERP_035570
  • MPN: RKNL-C240CL40EAHA
  • UPC: 662021316265
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

Rheem® Classic Electric Heat Package Unit, Series: RKNL-C, C240CL40E Model, 240000 Btu/hr Cooling, 400000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 95 A, 70.34 kW Cooling, 1/3 hp Outdoor Fan, 5 hp Indoor Fan, 1075 rev/min Outdoor Fan, 1725 rev/min Indoor Fan, 60 Hz, 3 -Phase, (2) Scroll Compressor, 8000 cu-ft/min, 11.4 IEER Rating, 11.1 EER, 20 ton, 14 -Burner, 2 -Stage, R-410A, HFC Refrigerant, 91 dBA Decibel Rating, Electric Ignition, Belt Drive, Outdoor Coil - 53.3 sq-ft Face Area, 22 Fins/in, Indoor Coil - 26.67 sq-ft Face Area, 13 Fins/in Coil Rating, 1 in Drain Connection, (8) 2 x 25 x 20 in Filter, Steel, Galvanized, Baked Enamel-Coated, 125 deg F Ambient, 152.09 in L x 85.91 in W x 57.72 in H

Amperage Rating      :      95 A
CFM Rating      :      8000 cu-ft/min
Coil Rating      :      Outdoor Coil - 53.3 sq-ft Face Area, 22 Fins/in, Indoor Coil - 26.67 sq-ft Face Area, 13 Fins/in
Compressor Type      :      (2) Scroll
Connection Type      :      1 in Drain
Decibel Rating      :      91 dBA
Dimensions      :      152.09 in L x 85.91 in W x 57.72 in H
Drive Type      :      Belt
EER Rating      :      11.1
Filter Size      :      (8) 2 x 25 x 20 in
Finish      :      Galvanized, Baked Enamel-Coated
Frequency Rating      :      60 Hz
HP Rating      :      1/3 hp Outdoor Fan, 5 hp Indoor Fan
IEER Rating      :      11.4
Ignition Type      :      Electric
Input BTU Rating      :      240000 Btu/hr Cooling, 400000 Btu/hr Heating
Material      :      Steel
Model      :      C240CL40E
Number of Burners      :      14
Number of Stages      :      2
Phase      :      3
Refrigerant Type      :      R-410A, HFC
Rotational Speed      :      1075 rev/min Outdoor Fan, 1725 rev/min Indoor Fan
Temperature Rating      :      125 deg F Ambient
Tonnage      :      20 ton
Voltage Rating      :      208 - 230 VAC
Wattage      :      70.34 kW Cooling
  • Complete factory charged, wired and run tested
  • Scroll compressors with internal line break overload and high-pressure protection
  • Convertible air flow - vertical down flow or horizontal side flow
  • TXV refrigerant metering device
  • High pressure and low pressure/loss of charge protection standard on all models
  • Solid core liquid line filter drier
  • One-slab, single pass designed evaporator and condenser coils facilitate easy cleaning for maintained high efficiencies
  • Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream
  • Hinged major access door with heavy-duty gasketing, 1/4 in turn latches and door retainers, slide out Indoor fan assembly for added service convenience
  • Powder paint finish meets ASTMB117 steel-coated on each side for maximum protection, G90 galvanized
  • Base pan with drawn supply and return opening for superior water management
  • Forkable base rails for easy handling and lifting, one-point electrical and gas connections
  • Internally sloped slide out condensate pan conforms to ASHRAE 62 standards
  • High performance belt drive motor with variable pitch pulleys and quick adjust belt system
  • Permanently lubricated evaporator, condenser and gas heat inducer motors
  • Condenser motors are internally protected, totally enclosed with shaft down design
  • 2 in filter standard with slide-out design, two-stage gas valve and direct spark ignition
  • Tubular heat exchanger for long life and induced draft for efficiency and reliability
  • Solid-state furnace control with on board diagnostics
  • 24 V control system with resettable circuit breakers