Contact 1-800-314-3578

  1. pin-int

Samsung AJ012JNLDCH/AA ERP_062964

Samsung FJM AJ012JNLDCH/AA Mini-Split Heat Pump, 12000 Btu/hr Cooling, 13000 Btu/hr Heating BTU, 345/355/375 cu-ft/min

  • Manufacturer: Samsung
  • Brand Name: Samsung
  • Part Number: ERP_062964
  • MPN: AJ012JNLDCH/AA
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Sign In for Availability

Samsung Mini-Split Heat Pump, Series: FJM, 208 - 230 VAC, 0.35 A Running, 76 W Fan Motor Output, 60 Hz, 1 -Phase, 12000 Btu/hr Cooling, 13000 Btu/hr Heating BTU, 345/355/375 cu-ft/min, 3/8 in Flared Suction, 1/4 in Flared Liquid Connection, R-410A Refrigerant, Ducted Vent, Ducted or Ductless, 27 - 32 dBA, 2.8 pt/hr Dehumidification, Galvanized Steel, 70 deg F DB, 60 deg F WB Heating, 80 deg F DB, 67 deg F WB Cooling, 7-13/16 in H x 35-7/16 in W x 23-5/8 in D

Amperage Rating      :      0.35 A Running
BTU Rating      :      12000 Btu/hr Cooling, 13000 Btu/hr Heating
CFM Rating      :      345/355/375 cu-ft/min
Connection Type      :      3/8 in Flared Suction, 1/4 in Flared Liquid
Dehumidification      :      2.8 pt/hr
Dimensions      :      7-13/16 in H x 35-7/16 in W x 23-5/8 in D
Frequency Rating      :      60 Hz
Material      :      Galvanized Steel
Phase      :      1
Power Rating      :      76 W Fan Motor Output
Refrigerant Type      :      R-410A
Sound Level      :      27 - 32 dBA
Temperature Rating      :      70 deg F DB, 60 deg F WB Heating, 80 deg F DB, 67 deg F WB Cooling
Vent, Ducted or Ductless      :      Ducted
Voltage Rating      :      208 - 230 VAC
  • High voltage terminal block temperature sensor to disable unit in the event overheating of power connection
  • Gravity drain as standard
  • The indoor unit shall be powered by the outdoor unit
  • The heat exchanger shall be mechanically bonded fin to copper tube
  • Indoor fan is a twin backward centrifugal-type with a single fan motor
  • Three-speed fan setting and auto setting
  • Control signal shall be DDC-type signal
  • Interconnect control wire between outdoor and indoor units shall be 16 AWG x two shielded
  • Controls shall integrate with a BMS system
  • The system shall integrate with Samsung controls solution
  • The unit includes a simple filter as standard, field provided filtration is recommended
  • Pressure drop across the filter must be factored into the total ESP