Shipco® 110D-1PH ERP_055939

Model D pumps are 1-stage, centrifugal, bronze-fitted design for applications with temperatures typically 200 deg F or less. However, higher temperatures are possible depending on specific operating conditions. Pump types (such as 106-D, 110-D, etc.) selected depends on the design operating conditions-flow rate, discharge pressure and NPSH requirements; impellers trimmed to operating conditions. Model D can be flange-mounted (Model DF) either vertically or horizontally (Model DH). Vertical mounting saves floor space and avoids dirt and water. Pump can also be fitted with a threaded suction adapter flange for in-line applications (DFT). Equipped with industry standard motors available in single or three-phase at either 1750 or 3500 rev/min. Pumps are furnished with bleed lines, sometimes called seal flushing lines, to help prevent the pump from vapour binding and to allow pump operation against a dead shut-off for a period of time without burning seals. Standard mechanical seals provide for temperatures up to 250 deg F. Higher temperature seals and special faces available upon request.

Shipco® Centrifugal Pump, Series: D, 120/240 VAC, 60 Hz, 1/3 hp, 3500 rev/min Speed, 1 -Phase, 3/4 in Connection, Flanged Connection, Vertical Mounting, Cast Iron Case Body, 230 deg F

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Shipco_110D_1PH_Manual.pdf