Contact 1-800-314-3578
SpacePak® Integral Electric Heat Module, 34100 Btu/hr Heating BTU, 550 cu-ft/min Nominal, 440 cu-ft/min Minimum, 208/230 VAC, 48 A Full Load and 60 A Minimum Circuit at 208 VAC, 43 A Full Load and 54 A Minimum Circuit at 230 VAC, 10 kW, 1 -Phase, 60 Hz, Heavy Gauge Corrosion-Resistant Steel Frame, 30 in L
| Amperage Rating | : | 48 A Full Load and 60 A Minimum Circuit at 208 VAC, 43 A Full Load and 54 A Minimum Circuit at 230 VAC |
| BTU Rating | : | 34100 Btu/hr Heating |
| CFM Rating | : | 550 cu-ft/min Nominal, 440 cu-ft/min Minimum |
| Dimensions | : | 30 in L |
| Frequency Rating | : | 60 Hz |
| Material | : | Heavy Gauge Corrosion-Resistant Steel Frame |
| Phase | : | 1 |
| Power Rating | : | 10 kW |
| Voltage Rating | : | 208/230 VAC |
- Integral electric heat modules have been specifically designed to provide a heating option for SpacePak air distribution systems
- They are easy to install in both new and existing installations
- Fan coil unit field-converted to vertical supply air discharge, the heat module will not fit due to the resulting blower housing obstruction and should not be used
- Equipped with an internal modulating feature, heat discharge temperatures are sensed and can be controlled regardless of the load condition
- Installs directly into fan coil unit-does not require any ductwork configuring or assembly
- Modulating heat
- Duct sensor located in the air stream monitors discharge temperature
- Solid state power controllers
- Can be used in conjunction with heat pumps
- Preset modulating output to maintain maximum discharge air temperature regardless of load conditions
- 24 V control wiring
- Fail safe circuitry-all controls de-energize the heater which prevents runaway overheating conditions
- Grade A nichrome-resistance wire (80% nickel, 20% chromium)
- Coils are machine crimped into stainless steel terminals
- High-temperature ceramic terminal and coil support insulators
Instruction/Installation Manual