Contact 1-800-314-3578
SpacePak® Hydronic Fan Coil, Series: WCSP-G, 3 ton Nominal, 36000 - 42000 Btu/hr BTU, 208 - 230 VAC, 2.8 A Full Load, 1/2 hp, 60 Hz, 1 -Phase, 850 cu-ft/min at 1.5 in WC, Configuration: Horizontal, Baked Enamel, 29-3/8 in L x 33-1/8 in W x 14-1/8 in H
| Amperage Rating | : | 2.8 A Full Load |
| BTU Rating | : | 36000 - 42000 Btu/hr |
| CFM Rating | : | 850 cu-ft/min at 1.5 in WC |
| Configuration | : | Horizontal |
| Dimensions | : | 29-3/8 in L x 33-1/8 in W x 14-1/8 in H |
| Finish | : | Baked Enamel |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Nominal Capacity | : | 3 ton |
| Phase | : | 1 |
| Voltage Rating | : | 208 - 230 VAC |
- Corrosion-resistant cabinet with durable baked enamel finish
- Six-rows copper tube aluminum fin water coil provides efficient operation
- Blower motor is factory-balanced for vibration-free operation
- Primary and secondary drain connections (3/4 in FPT) in durable, polyethylene primary drain pan meet international mechanical code 307.2.3
- Factory-assembled, pre-wired control centre with high and low voltage terminal blocks and low voltage transformer
- Sweat-type water line connections
- Can be installed with a conventional outdoor condensing unit as long as capacity and refrigerant line connections meet SpacePak recommendations
- PSC motor-type
- 6-3/8 in W x 9 in Dia wheel
- 7/8 in bottom water in and top water out
- 3/4 in NPT condensate drain, 19 in Dia return inlet
Instruction/Installation Manual