Contact 1-800-314-3578

SUPERIOR® 586WAS-10ST ERP_056222
  1. pin-int

SUPERIOR® 586WAS-10ST ERP_056222

SUPERIOR® Integra-Seal 586WAS-10ST Ball Valve with Access Fitting, 5/8 in Nominal, ODS Connection, Forged Brass Body

  • Manufacturer: Sherwood Valve
  • Brand Name: SUPERIOR®
  • Part Number: ERP_056222
  • MPN: 586WAS-10ST
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

Superior's ball valves are made in the USA with the highest manufacturing quality standards. Our ball valves are designed with the most reliable stem seals and a superior leak rate. A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a superior exclusive! All sizes incorporate a dual stem seal design utilizing teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses teflon gaskets to provide a secondary seal - a third superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow- even during evacuation of the system. Full flow ports in all size 3/8 in through 3-1/8 in. These ball valves are non-directional flow valves and may be installed in any position.

SUPERIOR® Integra-Seal Ball Valve with Access Fitting, ODS Connection, 5/8 in Nominal, 700 lbf/sq-in Pressure, 1/2 in Opening, 14.6 Flow Coefficient, Forged Brass Body, PTFE Ball Seal, Polished Brass/Carbon Steel Ball Trim, Teflon Packing Material, -40 to 325 deg F, 6-1/2 in L x 1.38 in W x 2.36 in H

Body Material      :      Forged Brass
Connection Type      :      ODS
Dimensions      :      6-1/2 in L x 1.38 in W x 2.36 in H
Flow Coefficient (Cv)      :      14.6
Nominal Size      :      5/8 in
Opening Size      :      1/2 in
Packing Material      :      Teflon
Pressure Rating      :      700 lbf/sq-in
Seal Material      :      PTFE Ball
Temperature Rating      :      -40 to 325 deg F
Trim Material      :      Polished Brass/Carbon Steel Ball
  • Polished brass or carbon steel ball resists corrosion
  • Seal cap design allows operation without removal of cap
  • PTFE ball seals and gaskets ensure tight leak-free valve
  • Full-size ports for unrestricted flow
  • Forged seal cap
  • Seal cap design permits valve operation without removal of seal cap
  • Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/SUPERIOR_592WAS_13ST_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/SUPERIOR_586WAS_10ST_Specification_Sheet.pdf