Contact 1-800-314-3578

TAC VT2213G23B020 ERP_025438
  1. pin-int

TAC VT2213G23B020 ERP_025438

TAC PopTop VT VT2213G23B020 Zone Valve Assembly, 1/2 in Nominal, Sweat Connection, 2-Way/2-Position -Ways/Position

  • Manufacturer: Schneider Electric
  • Brand Name: TAC
  • Part Number: ERP_025438
  • MPN: VT2213G23B020
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

TAC PopTop Zone Valve Assembly, Series: VT, 1/2 in Nominal, Sweat Connection, 2-Way/2-Position -Ways/Position, 300 lbf/sq-in Static, 15 lb/sq-in Steam, 25 lbf/sq-in Close-Off Pressure, 3.5 Flow Coefficient, Nickel-Plated Brass Stem, Brass Trim, Brass Seat, Forged Brass, 7.5 V-A Power Consumption, Hot or Chilled Water, 50% Glycol Service Type, Configuration: NO, 110 VAC at 60 Hz, 120 VAC at 50 Hz, 6.5 W, 32 - 200 deg F Fluid, 104 deg F Ambient, Environmental Conditions: 5 - 95% RH Non-Condensing, -40 to 160 deg F Shipping and Storage

Configuration      :      NO
Connection Type      :      Sweat
Environmental Conditions      :      5 - 95% RH Non-Condensing, -40 to 160 deg F Shipping and Storage
Flow Coefficient (Cv)      :      3.5
Material      :      Forged Brass
Nominal Size      :      1/2 in
Number of Ways/Position      :      2-Way/2-Position
Power Consumption      :      7.5 V-A
Power Rating      :      6.5 W
Pressure Rating      :      300 lbf/sq-in Static, 15 lb/sq-in Steam, 25 lbf/sq-in Close-Off
Seat Material      :      Brass
Service Type      :      Hot or Chilled Water, 50% Glycol
Stem Material      :      Nickel-Plated Brass
Temperature Rating      :      32 - 200 deg F Fluid, 104 deg F Ambient
Trim Material      :      Brass
Voltage Rating      :      110 VAC at 60 Hz, 120 VAC at 50 Hz
  • Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
  • Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
  • Direct replacement for all existing 2-position pop-top applications
  • Hysteresis synchronous motor for long life
  • Spring-return operation provides a fail-safe
  • Actuator-mounts directly onto valve body without need for linkages or calibration
  • No manual override lever
  • Actuator can be replaced without any tools or removal of valve from system
  • Quicker installation time and easier maintenance
  • Factory assembled valve and actuator combinations
  • The valves can be-mounted in horizontal or vertical piping
  • 18 in standard wire lead electrical connection
  • Spring-return normally open action
  • Buna-N paddle
  • 24 - 240 VAC at 101 mA minimum to 5 A maximum and 9 - 30 VDC at 100 mA maximum end switch
  • Stainless steel base plate, aluminum cover actuator
  • NEMA 1 protection rating