Takagi T-K3 ERP_052809

The T-K3 model is one of Takagi's most versatile and powerful residential tankless water heaters. The T-K3 has easy-link capability, allowing owners to connect up to four units without the use of a controller unit. The TK3 can also be converted to a direct vent model to further extend its application in residential homes.

Takagi Tankless Water Heater, 11000 - 199000 Btu/hr BTU, 92 W Operation, 6.2 W Standby, 111 W Freeze Protection, 0.5 gal/min, 252 gal/hr First Hour Delivery, 0.84 - 0.86 Energy Factor, 78% (Natural Gas), 77% (Liquid Propane) AFUE, 4 in Vent, Direct Vent, 0.77 A, 120 V, 60 Hz, 3/4 in Water and Gas Connection, 15 - 150 lb/sq-in Pressure, Natural, Propane Gas Fuel, Electronic Ignition, 13.8 in W x 21/2 in H x 8-1/2 in D

• 13.8 in W, the T-K3 tankless has the ability to be recessed between wall studs for even more space savings
• Activates at only 0.5 gal/min, which allows the use of smaller water flows in bathroom sinks and showers, this is a pretty standard flow rate now for new generation tankless water heaters
• Easy Link technology allows the T-K3 to be installed with upto three other units without the use of an additional control box
• Can easily use a direct vent conversion to import combustion air from outside
• Offers eight separate temperatures. However, if you want a specific temperature than it is required that you buy the TM-RE10 temperature controller
• Vent pipe run up to 50 ft with five elbows, instead of the normal 35 with three elbows, this can be a great addition if your particular installation has a long vent run
• 5 - 10-1/2 in WC natural gas pressure inlet
• 8 - 13-1/2 in WC LP gas pressure inlet

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Takagi_T_K3_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Takagi_T_K3_Specification_Sheet.pdf