Contact 1-800-314-3578

TEMPSTAR® RGS150HDAA0AAT ERP_053843
  1. pin-int

TEMPSTAR® RGS150HDAA0AAT ERP_053843

TEMPSTAR® RGS150HDAA0AAT Single Package Rooftop Gas Heat/Electric Cooling Unit, 208 - 230 VAC, 63.2 A, 6000 cu-ft/min

  • Manufacturer: International Comfort Products
  • Brand Name: TEMPSTAR®
  • Part Number: ERP_053843
  • MPN: RGS150HDAA0AAT
  • Min. Order Qty: 1
  • Qty. Interval: 1
    • Sign In for Availability

TEMPSTAR® Single Package Rooftop Gas Heat/Electric Cooling Unit, 150000 Btu/hr Cooling, 180000 - 250000 Btu/hr Heating Input BTU Rating, 208 - 230 VAC, 63.2 A, 12.9 kW, 1 hp, 1175 rev/min, 60 Hz, 3 -Phase, Scroll Compressor, 6000 cu-ft/min, 10.8 EER, 12.5 ton, 2 -Stage, R-410A Refrigerant, 72.9 dBA Decibel Rating, Pre-Painted, 88-1/8 in L x 59-1/2 in W x 49-3/8 in H

Amperage Rating      :      63.2 A
CFM Rating      :      6000 cu-ft/min
Compressor Type      :      Scroll
Decibel Rating      :      72.9 dBA
Dimensions      :      88-1/8 in L x 59-1/2 in W x 49-3/8 in H
EER Rating      :      10.8
Finish      :      Pre-Painted
Frequency Rating      :      60 Hz
HP Rating      :      1 hp
Input BTU Rating      :      150000 Btu/hr Cooling, 180000 - 250000 Btu/hr Heating
Number of Stages      :      2
Phase      :      3
Refrigerant Type      :      R-410A
Rotational Speed      :      1175 rev/min
Tonnage      :      12.5 ton
Voltage Rating      :      208 - 230 VAC
Wattage      :      12.9 kW
  • High efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
  • Field convertible from vertical to horizontal air flow
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
  • Fully insulated cabinet
  • Redundant gas valve, up to two-stage of heating
  • Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
  • High efficiency, gas heat with induced draft flue exhaust design
  • Scroll compressors with internal line break overload protection
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
  • Belt drive evaporator fan motor and pulley combinations
  • Dual compressors
  • Low heat
  • Standard motor (3 - 15 ton)
  • Aluminum/copper condenser and evaporator coil
  • Original design digit T
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/TEMPSTAR_RGS120HDCA0AAA_Specification_Sheet.pdf