Testo 0560 0550 ERP_080083

The Testo 549 digital manifold offers many advantages in comparison with analog manifolds the instrument will make it easier for you to work on refrigeration systems and heat pumps. With its integrated temperature measurement and automatic calculation of superheating/subcooling, you can now do away with additional measurements and manual comparisons (when using an optional clamp probe). You can also use the manifold for 60 current refrigerants.

Testo Digital Manifold, Series: Testo 549, -20 to 50 deg C Operating, -20 to 60 deg C Storage, +/-0.5 deg C Temperature, +/-0.5% fs Pressure Accuracy, 0.1 deg C Temperature, 0.01 bar Pressure Resolution, -50 to 150 deg C Temperature, -1 to 60 bar Pressure, -1 to 0 bar Vacuum Measuring Range, R-11, R-12, R-123, R-1234yf, R-1234ze, R-125, R-13B1, R-134A, R-14, R-142B, R-152A, R-161, R-22, R-227, R-290, R-32, R-401A, R-401B, R-401C, R-402A, R-402B, R-404A, R-406A, R-407A, R-407B, R-407C, R-407D, R-407F, R-408A, R-409A, R-410A, R-A11A, R-412A, R-413A, R-414B, R-416A, R-417A, R-420A, R-421A, R-422A, R-422B, R-422B, R-422C, R-422D, R-424A, R-426A, R-427A, R-434A, R-437A, R-438A, R-502, R-503, R-507, R-508A, R-508B, R-600, R-600A, R-744 (CO2), R-718 (H2O) Refrigerant, 200 mm L x 109 mm W x 63 mm H

• 60 current refrigerants stored in the instrument
• Calculation of superheating and subcooling in real time (with optional clamp probe): saves you from having to carry
• Temperature-compensated leakage test
• Two temperature-compensated pressure sensors
• Two temperature-compensated pressure sensors ensure fast, precise measurement of high and low pressure and automatic calculation of the evaporating and condensing temperature
• Two connections for external temperature probes with temperature probes attached (optional), the digital manifold can calculate superheating and sub cooling simultaneously and in real time, This means you can do away with manual comparisons, which are prone to error, and obtain fast, accurate results
• Leakage test of refrigeration systems: the manifold can carry out a temperature-compensated leakage test of the system for rough tightness testing. For this, the initial system pressure is compared with the system pressure at the end of the measurement, so that the difference (if there is one) can be displayed immediately
• Can be used for standard refrigerants: the 60 most common refrigerants are stored in the instrument as standard
• Probe connections: 2 x plug-in (NTC) for temperature and 3 x 7/16 in UNF for pressure measurement
• 250 hr (without illumination, without Bluetooth) battery life
• IP42 protection class

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Testo_0563_0550_Specification_Sheet.pdf